holden.wiki

• MODEL SELECTION INDEX
• Holden Special Vehicles - Menu
• Section GFuel And Exhaust Systems
  • 1 Purpose
    • 1.1 General Information
    • 1.2 Service Operations
  • 2 Fuel Tank
    • 2.1 General Information
      • Modular Fuel Pump And Sender Assembly
      • Fuel Pump
      • Fuel Flow Through The Modular Fuel Pump And Sender Assembly
      • Fuel Limiter Vent Valve
      • Fuel Tank Pressure Sensor
      • Pressure Regulator
      • Fuel Strainer
      • Fuel Filter Assembly
      • Fuel Level Sender Assembly
    • 2.2 System Components
    • 2.3 Fuel Pipe Arrangement
  • 3 Service Operations
    • 3.1 Quick-Connect Fittings
    • 3.2 Fuel Tank Siphon Procedure
    • 3.3 Fuel Tank Barrier
    • 3.4 Fuel Tank Assembly
      • Remove
      • Reinstall
    • 3.5 Fuel Filler Neck Assembly
    • 3.6 Modular Fuel Pump And Sender Assembly
      • Remove
      • Test
      • Disassemble
      • Reassemble
      • Reinstall
    • 3.7 Fuel Level Sender Assembly
    • 3.8 Modular Fuel Pump And Strainer Assembly
      • Reinstall
      • Remove
    • 3.9 Fuel Filter Assembly
    • 3.10 Fuel Pressure Regulator
      • Remove
      • Reinstall
    • 3.11 Modular Fuel Pump And Sender Assembly O-Rings
    • 3.12 Fuel Tank Pressure Sensor
      • Remove
      • Reinstall
    • 3.13 Fuel Fill Limiter Vent Valve Assembly (FLVV)
      • Remove
      • Reinstall
    • 3.14 Fuel Filler Cap
      • Remove
      • Reinstall
  • 4 Specifications
  • 5 Torque Wrench Specifications
  • 6 Special Tools