holden.wiki

• MODEL SELECTION INDEX
• UBS JACKAROO
• SECTION 2D - FITTING INSTRUCTIONS
  • INTRODUCTION
  • FOREWORD
  • 1. GENERAL INFORMATION
    • 1-1 PRECAUTIONS DURING INSTALLATION
    • 1-2 INSTALLATION PREPARATION
    • 1-3 TIGHTENING TORQUE
    • 1-4 PRECAUTIONS FOR SAFETY INSTALLATION
    • 1-5 PIPE JOINT PRECAUTIONS
    • 1-6 GENERAL PRECAUTIONS IN ASSEMBLY
    • 1-7 CHARGING REFRIGERANT (HFC-134a)
  • 2. INSTALLATION INSIDE PASSENGER COMPARTMENT
  • 3. INSTALLATION INSIDE ENGINE COMPARTMENT
  • 4. AFTER INSTALLATION
    • 4-1 CHARGING REFRIGERANT (HFC-134a)
    • 4-2 FINAL LEAKAGE CHECK
    • 4-3 RE-ADJUSTMENT OF COMPRESSOR BELT
    • 4-4 ADJUSTMENT OF ENGINE IDLING SPEED
    • 4-5 RESTORE THE VEHICLE
    • 4-6 FINAL INSPECTION (SAFETY CHECK)