holden.wiki

• MODEL SELECTION INDEX
• MY 2004 VY Series AWD - Service Information
• Section 12N Wipers, Washers and Horn
  • 1 General Information
    • 1.1 Rear Wiper Assembly
      • Rear Wiper
      • Rear Wiper Control Module
      • Rear Wiper Motor Assembly
      • Rear Wiper Ramp
      • Rear Wiper Assembly Functional Operation
        • Intermittent Wipe Cycle Operation
        • Continuous Wipe Mode
    • 1.2 Rear Washer Assembly
  • 2 Service Operations – Wipers and Washers
    • 2.1 Rear Wiper Blade Insert
      • Replace
    • 2.2 Rear Wiper Blade Assembly
      • Remove
      • Reinstall
    • 2.3 Rear Wiper Arm Assembly
      • Remove
      • Reinstall
    • 2.4 Rear Wiper Ramp
      • Remove
      • Reinstall
    • 2.5 Rear Wiper Control Module
      • Remove
      • Reinstall
    • 2.6 Rear Wiper Motor Assembly
      • Prerequisites
        • Safety Requirements
        • Equipment
        • Testing Procedures
      • Diagnose Rear Wiper Motor Assembly Wiring
        • Introduction
        • Test Description
        • Notes on the Diagnostic Chart
      • Diagnose Rear Wiper Motor Assembly Operation
        • Introduction
        • Test Description
      • Wiper Motor Limit Switches Malfunction Table
      • Diagnose Rear Wiper Assembly and Liftgate Interface Operation
        • Introduction
        • Test Description
        • Notes on the Diagnostic Chart
      • Remove
      • Reinstall
    • 2.7 Wiring Diagram – Wipers and Washers
    • 2.8 Wiring Diagram – Rear Wiper Control Module
    • 2.9 Connector Diagrams – Wipers and Washers – Chart A
    • 2.10 Connector Diagrams – Wipers and Washers – Chart B
  • 3 Torque Wrench Specifications