holden.wiki

• MODEL SELECTION INDEX
• MY2005 VZ Series - Service Information
• Section 12ECruise Control
  • 1 General Information
    • 1.1 Components
      • Components V6
        • Cruise Control Switch Assembly
        • Instrument Cluster Assembly
        • Clutch Pedal Switch (Manual Only)
        • Stop Lamp and BTSI Switch Assembly
        • Cruise Control Release and Extended Brake Travel Switch Assembly
        • Powertrain Interface Module
        • Engine Control Module
        • Body Control Module (BCM)
        • Throttle Actuator Assembly
      • Components GEN III V8
        • Cruise Control Switch Assembly
        • Instrument Cluster Assembly
        • Clutch Pedal Switch (Manual Only)
        • Stop Lamp and BTSI Switch Assembly
        • Cruise Control Release and Extended Brake Travel Switch Assembly
        • Powertrain Interface Module (PIM)
        • Throttle Actuator Control Module (TACM)
        • Body Control Module (BCM)
        • Powertrain Control Module (PCM)
        • Throttle Actuator Assembly
    • 1.2 System Operation – V6
      • Preliminary Information
        • Enabled and Disabled
        • Activated and Deactivated
      • Engaging the Cruise Control
      • Brake Before Cruise
      • Activating the Cruise Control
      • Deactivating the Cruise Control
        • Pressing the Brake Pedal
        • Pressing the Cruise ON–OFF Button
        • Pressing the Clutch Pedal (Manual Vehicles Only)
      • Decelerating While Cruise Control is Activated
      • Resuming a Speed After Cruise Control Has Been Deactivated
      • Accelerating While Cruise Control is Activated
        • Using the Cruise Control Switch Assembly
        • Pressing the Accelerator Pedal
    • 1.3 System Operation – GEN III V8
      • Preliminary Information
        • Enabled and Disabled
        • Activated and Deactivated
      • Engaging the Cruise Control
      • Brake Before Cruise
      • Activating the Cruise Control
      • Deactivating the Cruise Control
        • Pressing the Brake Pedal
        • Pressing the Cruise ON–OFF Button
        • Pressing the Clutch Pedal (Manual Vehicles Only)
      • Decelerating While Cruise Control is Activated
      • Resuming a Speed After Cruise Control Has Been Deactivated
      • Accelerating While Cruise Control is Activated
        • Using the Cruise Control Switch Assembly
        • Pressing the Accelerator Pedal
  • 2 Diagnostics
    • 2.1 Diagnostic General Information
      • Basic Knowledge Required
      • Basic Diagnostic Tools Required
      • Tech 2 Data List – V6
      • Tech 2 Data List – Gen III V8
    • 2.2 Diagnostic Systems Check
      • Diagnostic Systems Check – V6
      • Diagnostic Systems Check – Gen III V8
    • 2.3 Wiring Diagrams and Connector Charts
      • Wiring Diagram – V6
      • Connector Chart – V6
      • Wiring Diagram – GEN III V8
      • Connector Chart – Gen III V8
    • 2.4 Cruise Control Inoperative / Malfunctioning – V6
      • Circuit Description
      • Manual Vehicles Only
      • Test Description
      • Diagnostic Table Notes
      • Diagnostic Table
    • 2.5 Cruise Control Inoperative / Malfunctioning – GEN III V8
      • Circuit Description
      • Manual Vehicles Only
      • Test Description
      • Diagnostic Table Notes
      • Diagnostic Table
  • 3 Service Operations
    • 3.1 Cruise Control Switch Assembly
      • Remove
      • Test
        • Terminal Testing
      • Reinstall
    • 3.2 Stop Lamp and BTSI Switch Assembly
      • Remove
      • Test
      • Reinstall
    • 3.3 Cruise Control Release and Extended Brake Travel Switch Assembly
      • Remove
      • Test
      • Reinstall
    • 3.4 Clutch Pedal Switch
      • Remove
      • Test
      • Reinstall
  • 4 Special Tools