holden.wiki

• MODEL SELECTION INDEX
• MY2005 VZ Series - Service Information
• Section 3BFront Suspension – AWD
  • 1 General Description
  • 2 Wheel Alignment
    • 2.1 Steering Geometry
      • Caster
      • Camber
      • Wheel Toe
      • Steering Axis Inclination
      • Scrub Radius
      • Included Angle
      • Toe-Out On Turns
    • 2.2 Wheel Alignment Checking and Adjustment
      • Preliminary Inspection
      • Caster Adjustment
      • Camber Adjustment
      • Toe Adjustment
    • 2.3 Jacking Precautions
    • 2.4 Front Wheel Hub Assembly – End Float Checking Procedure
  • 3. Service Operations
    • 3.1 Service Notes And Cautions
    • 3.2 Suspension and Trim Height, Check
    • 3.3 Front Wheel Hub Assembly, Brake Rotor and/or Brake Shield
      • Remove
      • Inspect
      • Reinstall
    • 3.4 Front Wheel Hub Studs
      • Replace
    • 3.5 Front Strut Assembly
      • Remove
      • Reinstall
    • 3.6 Upper Strut Support Bearing and Mount
      • Remove
      • Reinstall
    • 3.7 Front Spring
      • Remove
      • Reinstall
    • 3.8 Front Strut Unit
      • Replace
    • 3.9 Steering Knuckle
      • Remove
      • Reinstall
    • 3.10 Front Control Arm Ball Joint Assembly
      • Inspect
      • Replace
    • 3.11 Front Control Arm
      • Remove
      • Reinstall
    • 3.12 Front Control Arm Rear Bushing
      • Replace
    • 3.13 Front Control Arm Front Isolating Bushing
      • Inspect
      • Replace
    • 3.14 Front Suspension Crossmember Cradle
      • Remove
      • Reinstall
    • 3.15 Stabiliser Bar Link
      • Replace
    • 3.16 Stabiliser Bar Isolator Bushes
      • Replace
    • 3.17 Stabiliser Bar
      • Remove
      • Reinstall
  • 4. Diagnosis
    • 4.1 General
      • Strut Diagnosis
      • Acceptance Criteria
    • 4.2 Diagnosis Guide
      • Hard or Heavy Steering
      • Excessive Play or Looseness in Steering
      • Erratic Steering on Application of Brakes
      • Vehicle Pulls to One Side
      • Front or Rear Wheel Tramp
      • Road Shocks
      • Scuffed Tyres
      • Cupped Tyres
      • Front Wheel Shimmy
      • Vehicle Wanders
  • 5. Specifications
    • Suspension Travel
    • Front Spring Details
    • Front Stabiliser Bar Details
    • Front Strut Details
    • Front Control Arm Details
    • Front Control Arm Ball Joint
    • Front Wheel Bearings
    • Wheel Bearing Angular 'Float'
    • Suspension Trim Height Specifications
    • Front Wheel Alignment Specifications
  • 6. Torque Specifications
  • 7. Special Tools