holden.wiki

• MODEL SELECTION INDEX
• MY2005 VZ Series - Service Information
• Section 3A Front Suspension
  • 1 General Description
  • 2 Wheel Alignment
    • 2.1 Steering Geometry
      • Caster
      • Camber
      • Wheel Toe
      • Steering Axis inclination
      • Scrub Radius
      • Included Angle
      • Toe-Out On Turns
    • 2.2 Wheel Alignment Checking and Adjustment
      • Preliminary Inspection
      • Caster Adjustment
      • Camber Adjustment
      • Toe Adjustment
    • 2.3 Jacking Precautions
    • 2.4 Front Wheel Hub Assembly – End Float Checking Procedure
  • 3 Service Operations
    • 3.1 Service Notes and Cautions
    • 3.2 Suspension and Trim Height, Check
      • Preliminary Inspection
      • Procedure
      • Front and Rear Suspension Height Comparison
    • 3.3 Front Wheel Hub Assembly, Brake Rotor and/or Brake Shiel
      • Remove
        • All VZ Models
      • Inspect
      • Reinstall
        • All VZ Except Coupe
        • All VZ Models
    • 3.4 Front Wheel Hub Studs
      • Remove
      • Reinstall
        • All VZ Except Coupe
        • Coupe Only
        • All VZ Models
    • 3.5 Front Strut Assembly
      • Remove
        • All VZ Models
        • All VZ Except Coupe
        • Coupe Only
        • All VZ Models
      • Reinstall
        • All VZ Models
        • All VZ Except Coupe
        • Coupe Only
        • All VZ Models
    • 3.6 Upper Strut Support Bearing and Mount
      • Remove
      • Reinstall
    • 3.7 Front Spring
      • Remove
      • Reinstall
    • 3.8 Front Strut Unit
      • Replace
    • 3.9 Steering Knuckle
      • Remove
        • All VZ Models
        • All VZ Except Coupe
        • Coupe Only
        • All VZ Models
      • Reinstall
        • All VZ Models
    • 3.10 Front Control Arm
      • Remove
      • Reinstall
    • 3.11 Front Control Arm Ball Joint
      • Inspect
    • 3.12 Front Control Arm Inner Bushing
      • Replace
    • 3.13 Front Control Arm Rod Bushing
      • Replace
    • 3.14 Front Control Arm Rod
      • Remove
      • Reinstall
    • 3.15 Front Control Arm Rod Insulating Bushing
      • Replace
    • 3.16 Front Suspension Crossmember
      • Remove
      • Reinstall
    • 3.17 Stabiliser Bar Link
      • Remove
        • All VZ Models
        • All VZ Except Coupe
        • Coupe Only
        • All VZ Models
      • Reinstall
        • All VZ Except Coupe
        • Coupe Only
        • All VZ Models
    • 3.18 Stabiliser Bar
      • Remove
      • Reinstall
  • 4 Diagnosis
    • General
    • Strut Diagnosis
    • Acceptance Criteria
    • 4.1 Diagnosis Guide
      • Hard or Heavy Steering
      • Excessive Play or Looseness in Steering
      • Erratic Steering on Brake Application
      • Vehicle Pulls to One Side
      • Front or Rear Wheel Tramp
      • Road Shocks
      • Scuffed Tyres
      • Cupped Tyres
      • Front Wheel Shimmy
      • Vehicle Wanders
  • 5 Specifications
    • Suspension Travel
    • Front Spring Details
    • Front Stabiliser Bar Details
    • Front Strut Details
    • Front Control Arm Details
    • Front Wheel Bearings
    • Suspension and Trim Height Specifications
    • Front Wheel Alignment Specifications
  • 6 Torque Wrench Specifications
  • 7 Special Tools