holden.wiki

• MODEL SELECTION INDEX
• MY2005 VZ Series - Service Information
• Section 4B3Front Final Drive, Bearing Housing & Driveshafts
  • 1 General Description
    • 1.1 Final Drive Assembly Identification
    • 1.2 Final Drive Maintenance
      • Maintenance
        • Driveshaft Bearings and Constant Velocity Joints
        • Differential Carrier Assembly
        • Final Drive Assembly Breather
      • Lubrication
  • 2 Minor Service Operations
    • 2.1 Checking Final Drive Lubricant Level
    • 2.2 Changing/Flushing Final Drive Lubricant
    • 2.3 Pinion Oil Seal
      • Replace
    • 2.4 Driveshaft Assembly
      • Remove
      • Reinstall
    • 2.5 Driveshaft Outer Constant Velocity Joint
      • Remove
      • Reinstall
    • 2.6 Driveshaft Inner Tripot Joint
      • Disassemble
      • Inspect
      • Reassemble
    • 2.7 Bearing Housing/Final Drive Carrier Outer Oil Seal
      • Replace
    • 2.8 Pinion Oil Seal
      • Replace
    • 2.9 Pinion Flange
      • Replace
  • 3 Major Service Operations
    • 3.1 Bearing Housing Assembly
      • Remove
        • GEN III V8 Engine
        • All AWD
      • Disassemble
      • Inspect
      • Reassemble
      • Reinstall
    • 3.2 Front Final Drive Assembly
      • Remove
        • GEN III V8 Engine
        • All AWD
      • Reinstall
    • 3.3 Removed Final Drive Assembly
      • Disassemble
        • Final Drive Cover
        • Examining Gear Tooth Contact
        • Drive Pinion
        • Differential Assembly
      • Inspect
        • General Items
        • Gears
        • Bearing Cups
        • Bearing Cone and Roller Assemblies
        • Pinion Flange
        • Carrier and Cover Housings
        • Differential Case
      • Reassemble
        • Differential
        • Drive Pinion – Shim Selection
        • Differential Assembly – Bearing Preload and Backlash
        • Final Drive Unit Assembly
  • 4 Diagnosis
  • 5 Specifications
  • 6 Torque Wrench Specifications
  • 7 Special Tools