holden.wiki

• MODEL SELECTION INDEX
• MY2005 VZ Series - Service Inforamtion
• Section 6D1-2Starting System – V6
  • 1 General Information
    • 1.1 Components
      • Starting System Components
      • Starter Motor and Solenoid Switch Components
        • Solenoid Switch
        • Planetary Drive Train
        • Armature
        • Brushes
    • 1.2 System Operation
      • Operation
      • Auto Start Feature
      • Clutch Pedal Switch (Manual Only)
      • Sequence of Operation
  • 2 Diagnostics
    • 2.1 Diagnostic General Information
      • Basic Diagnostic Tools Required
    • 2.2 Tech 2 Data List
    • 2.3 Diagnostic Systems Check
    • 2.4 Wiring Diagram
    • 2.5 Starting System Inoperative / Malfunctioning
      • Circuit Description
      • Diagnostic Table Notes
      • Diagnostic Table
      • Diagnostic Table – Slow Cranking, Solenoid Clicks or Chatter
  • 3 Minor Service Operations
    • 3.1 Safety Precautions
    • 3.2 Maintenance
      • Regular Checks
    • 3.3 On-Vehicle Testing
      • Prerequisites
      • Bad Connection Test
      • Starter Motor Ground Test
      • Switching Circuit Test
      • Cranking Voltage Test
      • Current Draw Test
      • Clutch Pedal Switch
        • Remove
        • Test
        • Reinstall
  • 4 Major Service Operations
    • 4.1 Starter Motor – RWD
      • Remove
      • Reinstall
    • 4.2 Starter Motor – AWD
      • Remove
      • Reinstall
    • 4.3 Starter Motor Bench Tests
      • Preliminary Checks
      • Pull-in Test
      • Hold-in Test
      • Drive Assembly Return Test
      • No Load Test
    • 4.4 Starter Motor Disassemble and Reassemble
      • Disassemble
      • Reassemble
    • 4.5 Solenoid Switch Tests
      • Test the Solenoid Switch
  • 5 Specifications
  • 6 Torque Wrench Specifications
  • 7 Special Tools