holden.wiki

• MODEL SELECTION INDEX
• MY2005 VZ Series - Service Information
• Section 6D3-2Starting System – GEN III V8
  • 1 General Information
    • 1.1 Components
      • Starting System Components
      • Starter Motor and Solenoid Components
        • Solenoid Switch
        • Planetary Drivetrain
        • Armature
        • Brushes
    • 1.2 System Operation
      • System Operation
        • Operation
        • Sequence of Operation
  • 2 Diagnostics
    • 2.1 Diagnostic General Information
      • Basic Diagnostic Tools Required
    • 2.2 Tech 2 Data List
    • 2.3 Diagnostic System Check
    • 2.4 Wiring Diagram
    • 2.5 Starting System Inoperative / Malfunctioning
      • Circuit Description
      • Diagnostic Table Notes
      • Diagnostic Table
  • 3 Minor Service Operations
    • 3.1 Safety Precautions
    • 3.2 Maintenance
      • Regular Checks
    • 3.3 On-vehicle Testing
      • Prerequisites
      • Poor Connection Test
      • Starter Motor Ground Test
      • Switching Circuit Test
      • Cranking Voltage Test
      • Current Draw Test
  • 4 Major Service Operations
    • 4.1 Starter Motor
      • Remove
      • Reinstall
    • 4.2 Starter Motor Bench Tests
      • Preliminary Checks
      • Solenoid Switch Tests
        • Pull-in Test
        • Hold-in Test
        • Drive Assembly Return Test
      • No Load Test
    • 4.3 Starter Motor Disassemble and Reassemble
      • Disassemble
      • Cleaning and Inspection
        • Pole Housing Check
        • Armature Check
        • Commutator Check
        • Brushes Check
        • Brush Plate Assembly Check
        • Drive Assembly Check
        • Bush Check
        • Solenoid Switch Check
      • Reassemble
  • 5 Specifications
  • 6 Torque Wrench Specifications
  • 7 Special Tools