holden.wiki

• MODEL SELECTION INDEX
• MY 2005 VZ Series - Service Information
• Section 7A1Clutch – V6 Engine
  • 1 General Information
  • 2 General Description
    • 2.1 Dual Mass Flywheel
      • Service Implications
    • 2.2 Clutch Control
      • Arrangement
    • 2.3 Clutch Master Cylinder/Actuating Cylinder Operation
      • Master Cylinder
        • Clutch Released
        • Clutch Applied
      • Clutch Actuating Cylinder Operation
  • 3 Service Operations
    • 3.1 Service Warnings, Cautions and Notes
    • 3.2 Fluid Level Check
    • 3.3 Clutch Hydraulic System, Bleed
    • 3.4 Clutch Fluid – Change
    • 3.5 Clutch Master Cylinder
      • Remove
      • Disassemble
      • Clean and Inspect
      • Reassemble
      • Reinstall
    • 3.6 Clutch Actuating Cylinder
      • Remove
      • Disassemble
      • Clean and Inspect
      • Reinstall
    • 3.7 Clutch Throwout Bearing
      • Remove
      • Clean and Inspect
      • Reinstall
    • 3.8 Clutch Pedal Assembly
      • Remove
      • Disassemble
      • Reassemble
      • Reinstall
    • 3.9 Clutch Pedal Switches
      • Clutch Cruise Cancel Switch
        • Replace
      • Clutch Pedal Calibration Switch
        • Replace
    • 3.10 Clutch Driven Plate and Pressure Plate
      • Remove
      • Inspect
      • Reinstall
    • 3.11 Dual Mass Flywheel
      • Replace
  • 4 Diagnosis
  • 5 Specifications
  • 6 Torque Wrench Specifications
  • 7 Special Tools