holden.wiki

• MODEL SELECTION INDEX
• MY 2005 VZ Series - Service Information
• Section 7B1Manual Transmission – V6 Engine
  • 1. General Information
    • 1.1 General Description
      • Synchroniser Assemblies
        • Synchroniser Action
      • Reverse Gear
      • Bearing Support
      • Lubrication
      • Selector Mechanism
      • Shift Pattern
      • Transmission Exploded Views
        • Case Components
        • Countershaft Components
        • Input Shaft Components
        • Selector Components
    • 1.2 Power Flows
      • Neutral
      • First Gear
      • Second Gear
      • Third Gear
      • Fourth Gear
      • Fifth Gear
      • Sixth Gear
      • Reverse Gear
    • 1.3 Transmission Serial Number
  • 2 Servicing Information
    • 2.1 Recommended Lubricant and Quantity
    • 2.2 Checking Transmission Lubricant Level
    • 2.3 Draining and Refilling Transmission
  • 3 Minor Service Operations
    • 3.1 Back-Up Lamp Switch
      • Replace
    • 3.2 Speed Sensor
      • Replace
    • 3.3 Shift Shaft Detent Plug, Spring and Plunger
      • Replace
    • 3.4 Transmission Support Mount
      • Replace
    • 3.5 Gearshift Lever Knob and Boot Assembly
      • Replace
    • 3.6 Gearshift Lever
      • Replace
  • 4 Major Service Operations
    • 4.1 General Service Information
    • 4.2 Transmission Extension Housing, Oil Seal and/or Speed Sensor Toothed Ring
      • Remove
        • Alternative Method
      • Reinstall
        • Output Shaft Taper Roller Bearings Preload Procedure
    • 4.3 Transmission Assembly
      • Remove
      • Reinstall
    • 4.4 Transmission Disassembly
  • 5 Diagnosis
    • 5.1 Symptoms – Manual Transmission
      • Strategy Based Diagnostics
      • Visual/Physical Inspection
      • Intermittent
      • Symptom List
    • 5.2 Transmission Fluid Leak Diagnosis
    • 5.3 Transmission Shifts Hard
    • 5.4 Transmission Gear Clash When Shifting Gears
    • 5.5 Transmission Noisy
    • 5.6 Transmission Does Not Shift Into One Gear
    • 5.7 Transmission Locked in One Gear
    • 5.8 Transmission Jumps Out of Gear
    • 5.9 Transmission Clunk on Acceleration or Deceleration
  • 6 Specifications
  • 7 Torque Wrench Specifications
  • 8 Special Tools