holden.wiki

• MODEL SELECTION INDEX
• MY 2006 VZ Series - Service Information
• Section 7B2Manual Transmission – GEN III V8
  • 1 General Information
    • MY2006 VZ Update
    • 1.1 General Description
      • Synchroniser Assemblies
        • Synchroniser Action
      • Reverse Gear
      • Bearing Support
      • Lubrication
      • Selector Mechanism
      • Reverse Lockout Mechanism
      • Shift Pattern
      • Transmission Exploded View
      • Transmission Power Flows
        • Neutral
        • First Gear
        • Second Gear
        • Third Gear
        • Fourth Gear
        • Fifth Gear
        • Sixth Gear
        • Reverse Gear
        • Manual Transmission Power Flows
    • 1.2 Transmission Serial Number
  • 2 Servicing Information
    • 2.1 Recommended Lubricant
    • 2.2 Checking Transmission Lubricant Level
    • 2.3 Draining and Refilling Transmission
  • 3 Minor Service Operations
    • 3.1 Back-Up Lamp Switch
      • Replace
    • 3.2 Speed Sensor
      • Replace
    • 3.3 Transmission Support Mount
      • Replace
    • 3.4 Reverse Lock-Out Solenoid Assembly
      • Remove
      • Disassemble
      • Reassemble
      • Reinstall
    • 3.5 Control Lever Knob, Boot & Control Lever Assembly
      • Remove
      • Reinstall
    • 3.6 Control Lever Boot
      • Replace
    • 3.7 Remote Shift Lever Boot
      • Remove
      • Reinstall
  • 4 Major Service Operations
    • 4.1 Transmission Output Shaft Seal and Boot
      • Remove
      • Reinstall
    • 4.2 Transmission Assembly
      • Remove
      • Reinstall
    • 4.3 Transmission Disassemble
      • Clutch Housing and Slave Cylinder
      • Extension Housing
      • Speedometer Pulse Ring
      • Reverse and 5th/6th Driven Gear
      • Countershaft Extension Assembly
      • Transmission Case
      • Gear Trains and Shift Rails
    • 4.4 Remote Control Shift Mechanism
      • Disassemble
      • Clean and Inspect
        • Clean
        • Inspect
      • Reassemble
    • 4.5 Transmission Sub-Assemblies
      • Disassemble
        • Mainshaft
        • Input Shaft
        • Countershaft Gear
        • Countershaft Extension
        • Synchromesh Assemblies
        • Reverse Idler Gear
        • Reverse Lockout Solenoid Assembly
        • Shift Rail and Fork Assemblies
        • Transmission Adaptor Plate
        • Transmission Case
        • Extension Housing
      • Clean And Inspect Components
        • Clean
        • Inspect
      • Reassemble
        • Synchromesh Assemblies – All
        • Reverse Synchromesh Assembly Only
        • Mainshaft
        • Input Shaft
        • Countershaft Gear
        • Countershaft Extension Gear
        • Reverse Idler Gear
        • Reverse Lockout Assembly
        • Shift Rail and Fork Assemblies
        • Transmission Adaptor Plate
        • Transmission Case
        • Extension Housing
    • 4.6 Bearing Shimming Procedures
      • Input Shaft, Mainshaft & Countershaft
      • Countershaft Extension
    • 4.7 Transmission Reassemble
      • Gear Trains and Shift Rails
      • Transmission Case
      • Countershaft Extension Assembly
      • 5th/6th Driven Gear
      • Reverse Synchromesh Assembly
      • Reverse Speed Gear
      • Speedometer Pulse Ring
      • Extension Housing
      • Clutch Housing and Slave Cylinder
  • 5 Diagnosis
    • 5.1 Transmission Shifts Hard
    • 5.2 Transmission Hard To Shift Into Reverse
    • 5.3 Gear Clash When Shifting Gears
    • 5.4 Transmission Noisy
    • 5.5 Transmission Jumps Out Of Gear
    • 5.6 Transmission Does Not Shift Into One Gear
    • 5.7 Transmission Locked In One Gear
  • 6 Specifications
  • 7 Torque Wrench Specifications
  • 8 Special Tools