holden.wiki

• MODEL SELECTION INDEX
• MY 2005 WL Series - Service Information
• Section 12C Instrumentation
  • 1 General Information
    • 1.1 General Description
      • Instrument Cluster
      • Instrument Cluster Warning Indicators
        • LED Warning Indicator Table
        • MFD Information Messages
        • MFD Animated Graphics
        • Warning Indicator Symbols
    • 1.2 Instrument Cluster Illumination
      • Chimes
    • 1.3 Instrument Cluster Operation
      • Ignition ON – Welcome Sequence Holden
    • 1.4 Ignition On System Check
      • Ignition OFF
    • 1.5 Alarms
      • Vehicle Immobilisation by ECM or PCM
    • 1.6 Trip Computer
      • Operation
      • Overspeed / Distance to Empty / Instantaneous Fuel
        • Overspeed
        • Mandatory Overspeed
        • Preset Overspeed
        • Distance to Empty
        • Instantaneous Fuel
      • Average Speed / Odometer / Average Fuel
        • Average Speed
        • Odometer
        • Average Fuel
      • Trip Time / Trip Distance / Fuel Used
        • Trip Time
        • Trip Distance
        • Fuel Used
      • Time to Arrival / Distance to Arrival / Remaining Fuel
        • Time to Arrival
        • Distance to Arrival
        • Remaining Fuel
      • Trip Time A/B / Trip Distance A/B / Fuel Used A/B
      • Police Mode
      • Stop Watch
    • 1.7 Multi-function Display
      • Constant Icons
        • Cruise Control
        • Power Mode (Automatic Transmission Only)
        • PRND321 (Automatic Transmission) – Normal Shift Mode
        • “54321” (5 Speed Transmission) – Active Select Mode
        • Traction Control or Electronic Stability Program
        • Radio Settings
        • Compact Disc (CD)
        • Audio Settings
      • Animated Warnings
        • Engine Warning Messages
        • Rear Lamp Failure Warning Messages
        • Vehicle Performance Warning Messages
        • Fuel Warning Messages
        • System Fault Warning Message
        • Rest Reminder Warning
        • Seat Belt Warning
        • Trapping Speed
        • Trap Speed Reset
      • Service Items
        • Service Due
        • Fuel Sender Error
      • Programming The Instrument Cluster
        • Fuel Calibration Programming
    • 1.8 Customisation Mode
      • Entering Customisation Mode (Options Menu)
      • Stop Watch
      • Rest Reminder
      • Radio MFD Messages
      • Confirmation Beeps
      • Factory Default Settings
    • 1.9 Police Mode
  • 2 Tech 2 Information
    • System Identification
    • Body Menu
      • Normal Mode
      • Diagnostic Trouble Codes
      • Data Display
      • Snapshot
      • Miscellaneous Tests
      • Program
    • 2.1 Normal Mode
      • Normal Mode Data List
    • 2.2 Diagnostic Trouble Codes
    • 2.3 Data Display
      • Instruments
      • Inputs
      • Trip Computer
      • Configuration
      • System Identification
    • 2.4 Snapshot
    • 2.5 Miscellaneous Tests
      • Warnings
      • Chime
    • 2.6 Gauge Control Tests
      • Speedometer
      • Tachometer
      • Temperature Gauge
      • Fuel Gauge
    • 2.7 Input Overrides
    • 2.8 Illumination
      • MFD / LCD
      • Pointers
      • Dials
    • 2.9 Self Test – All Functions On
      • Test Display
    • 2.10 MFD Test
      • LCD Tests
        • Test Display
    • 2.11 Program
      • Fuel Gauge Calibration
      • Configuration
      • Odometer
      • Speedometer calibration
      • Reset Service Interval
      • Reset Trip Computer Settings
  • 3 Wiring Diagrams and Connectors
    • 3.1 Wiring Diagrams – V6
    • 3.2 Wiring Diagrams – V8
    • 3.3 Connector Chart – V6
    • 3.4 Connector Chart – V8
    • 3.5 Instrument Cluster Inputs
      • P3 Connector Pin Locations
      • S237 Connector Pin Locations
  • 4 Diagnostics
    • 4.1 Diagnostic System Check
      • Circuit Description
      • Test Description
      • Diagnostic Aids
      • Diagnostic System Check Diagnostic Table
    • 4.2 Instrument Cluster Self Diagnostics
      • Self Diagnostic Mode Operation
        • Full Test
  • 5 Diagnostic Trouble Codes
    • General Information
    • 5.1 Diagnostic Trouble Code List
    • 5.2 DTC 6 – No Serial Data from TPMS
      • Circuit Description
    • 5.3 DTC 7 – No Serial Data from ABS / TCS / ESP – V6
      • Circuit Description
      • Test Description
      • Diagnostic Table Notes
      • DTC 7 Diagnostic Table
    • 5.4 DTC 8 – No Serial Data from ABS / TCS – V8
      • Circuit Description
      • Test Description
      • Diagnostic Table Notes
      • DTC 8 Diagnostic Table
    • 5.5 DTC 9 – No Serial Data from BCM
      • Circuit Description
      • Test Description
      • Diagnostic Table Notes
      • DTC 9 Diagnostic Table
    • 5.6 DTC 10 – No Serial Data from OCC
      • Circuit Description
      • Test Description
      • Diagnostic Table Notes
      • DTC 10 Diagnostic Table
    • 5.7 DTC 11 – No Serial Data from ECM – V6
      • Circuit Description
      • Test Description
      • Diagnostic Table Notes
      • DTC 11 Diagnostic Table
    • 5.8 DTC 11 – No Serial Data from PCM – V8
      • Circuit Description
      • Test Description
      • Diagnostic Table Notes
      • DTC 11 Diagnostic Table
    • 5.9 DTC 12 – No Serial Data from SDM
      • Circuit Description
      • Test Description
      • Diagnostic Table Notes
      • DTC 12 Diagnostic Table
    • 5.10 DTC 13 – No Instrument Poll from BCM
      • Circuit Description
      • Test Description
      • Diagnostic Table Notes
      • DTC 13 Diagnostic Table
    • 5.11 DTC 14 – No Serial Communication Data
      • Circuit Description
      • Module Data Bus Allocations for V6 and V8
      • Test Description
      • Diagnostic Table Notes
      • DTC 14 Diagnostic Table
    • 5.12 DTC 15 – No Serial Data from Audio System
      • Circuit Description
      • Test Description
      • Diagnostic Table Notes
      • DTC 15 Diagnostic Table
    • 5.13 DTC 16 – Fuel Level System
      • Circuit Description
      • Test Description
      • Diagnostic Table Notes
      • DTC 16 Diagnostic Table
    • 5.14 DTC 19 – Incorrect SDM Detected
      • Circuit Description
      • Test Description
      • Diagnostic Table Notes
      • DTC 19 Diagnostic Table
    • 5.15 DTC 21 or 22 – Trip Switch Faulty
      • Circuit Description
      • Test Description
      • Diagnostic Table Notes
      • DTC 21 or 22 Diagnostic Table
    • 5.16 DTC 24 – EEPROM Checksum Failure
      • Circuit Description
      • Test Description
      • Diagnostic Table Notes
      • DTC 24 Diagnostic Table
  • 6 Diagnostics For Non DTC Faults
    • Diagnosis For Hard-wired Input Signals
    • Diagnosis For Serial Data Input Signals
    • 6.1 Front Fog Lamp Indicator Not Working
      • Circuit Description
      • Test Description
      • Diagnostic Table Notes
      • Front Fog Lamp Indicator Not Working Diagnostic Table
    • 6.2 Turn Signal Indicator
      • Circuit Description
      • Test Description
      • Diagnostic Table Notes
      • Turn Signal Indicator Diagnostic Table
    • 6.3 High Beam Indicator
      • Circuit Description
      • Test Description
      • Diagnostic Table Notes
      • High Beam Indicator Diagnostic Table
    • 6.4 Security Status Indicator
    • 6.5 ABS OFF Warning Indicator – V6
      • Circuit Description
      • Test Description
      • Diagnostic Table Notes
      • ABS OFF Warning Indicator – V6 Diagnostic Table
    • 6.6 ABS OFF Warning Indicator – V8
      • ABS OFF Warning Lamp Operation
      • Circuit Description
      • Test Description
      • Diagnostic Table Notes
      • ABS OFF Warning Indicator – V8 Diagnostic Table
    • 6.7 Cruise Control – V6
      • Circuit Description
      • Test Description
      • Diagnostic Table Notes
      • Cruise Control – V6 Diagnostic Table
    • 6.8 Cruise Control – V8
      • Circuit Description
      • Test Description
      • Diagnostic Table Notes
      • Cruise Control (V8) Diagnostic Table
    • 6.9 Low Traction Control Display – V6
      • Circuit Description
      • Test Description
      • Diagnostic Table Notes
      • Low Traction Control Display – V6 No ESP Diagnostic Table
      • Low Traction Control Display – V6 With ESP Diagnostic Table
    • 6.10 Low Traction Control Display – V8
      • Circuit Operation
      • Test Description
      • Diagnostic Table Notes
      • Low Traction Control Display – V8 Diagnostic Table
    • 6.11 Alternator Warning – V6
      • Operation
      • Circuit Description
      • Test Description
      • Diagnostic Table Notes
      • Alternator Warning – V6 Diagnostic Table
    • 6.12 Alternator Warning – V8
      • Operation
      • Circuit Description
      • Test Description
      • Diagnostic Table Notes
      • Alternator Warning – V8 Diagnostic Table
    • 6.13 Trip Computer Switch
      • Operation
      • Circuit Description
      • Test Description
      • Diagnostic Table Notes
      • Trip Computer Switch Diagnostic Table
    • 6.14 Instrument Illumination
      • Operation
      • Circuit Description
      • Test Description
      • Diagnostic Table Notes
      • Instrument Illumination Diagnostic Table
    • 6.15 Brake Fail / Park Brake Warning
      • Brake Fail / Park Brake Warning
        • Operation
        • Circuit Description
      • Brake Fluid Warning
        • Operation
        • Circuit Description
      • Test Description
      • Diagnostic Table Notes
      • Brake Fail / Park Brake Warning Diagnostic Table
    • 6.16 Speedometer Diagnosis
      • Circuit Description – V6
      • Circuit Description – V8
      • Test Description
      • Diagnostic Table Notes
      • Speedometer Diagnostic Table
    • 6.17 Tachometer Diagnosis
      • Circuit Description – V6
      • Circuit Description – V8
      • Test Description
      • Diagnostic Table Notes
      • Tachometer Diagnostic Table
    • 6.18 Coolant Temperature Gauge Diagnostic
      • Circuit Description – V6
      • Circuit Description – V8
      • Test Description
      • Diagnostic Table Notes
      • Coolant Temperature Gauge Diagnostic Table
    • 6.19 Fuel Level Gauge Diagnosis
      • Circuit Description – V6
      • Circuit Description – V8
      • Test Description
      • Diagnostic Table Notes
      • Fuel Level Gauge Diagnostic Table
    • 6.20 Serial Data Communication
      • General Information
  • 7 Service Operations
    • 7.1 Instrument Cluster Removal And Reinstallation
      • Trim Removal and Reinstallation
      • Instrument Removal and Reinstallation
      • Sensor Removal and Reinstallation
      • Trip Computer Switch Removal and Reinstallation
      • Trip Computer Switch Testing
    • 7.2 Programming
      • Tech 2 Instrument Cluster Configuration.
        • Programming
        • Police Speedo Calibration
        • Fuel Gauge Calibration
        • Configuration
        • Odometer Reset
        • Speedometer Calibration
        • Reset Service Interval
        • Reset Trip Computer Settings
        • Fuel Calibration Settings
      • Fuel Gauge Calibration
      • Fuel Calibration Details
        • Configuration
        • Country
        • Engine Type
        • Speedometer Pulses
        • Vehicle Speed PPK Values
        • V8 4-speed Auto
        • V6 5-speed Auto
        • SRS Configuration
        • Transmission Type
        • Police Mode
        • Seat Belt Warning
        • Program Settings
      • 4 and 5 Speed Automatic Transmission
        • Transmission Programming
        • Odometer
      • Speedometer Calibration
      • Reset Service Interval
      • Reset Trip Computer Settings
  • 8 Special Tools