Menu Holden Logo

holden.wiki
Home Main Menu
Home Main Menu
  • MODEL SELECTION INDEX
  • MY 2005 WL Series - Service Information
  • Section 3A Front Suspension
    • 1 General Description
    • 2 Wheel Alignment
      • 2.1 Steering Geometry
        • Caster
        • Camber
        • Wheel Toe
        • Steering Axis inclination
        • Scrub Radius
        • Included Angle
        • Toe-Out On Turns
      • 2.2 Wheel Alignment Checking and Adjustment
        • Preliminary Inspection
        • Caster Adjustment
        • Camber Adjustment
        • Toe Adjustment
      • 2.3 Jacking Precautions
      • 2.4 Front Wheel Hub Assembly – End Float Checking Procedure
    • 3 Service Operations
      • 3.1 Service Warnings, Cautions and Notes
      • 3.2 Suspension and Trim Height, Check
        • Preliminary Inspection
        • Procedure
        • Front and Rear Suspension Height Comparison
      • 3.3 Front Wheel Hub Assembly, Brake Rotor and/or Brake Shiel
        • Remove
        • Inspect
        • Reinstall
      • 3.4 Front Wheel Hub Studs
        • Replace
      • 3.5 Front Strut Assembly
        • Remove
        • Reinstall
      • 3.6 Upper Strut Support Bearing and Mount
        • Remove
        • Reinstall
      • 3.7 Front Spring
        • Remove
        • Reinstall
      • 3.8 Front Strut Unit
        • Replace
      • 3.9 Steering Knuckle
        • Remove
        • Reinstall
      • 3.10 Front Control Arm
        • Remove
        • Reinstall
      • 3.11 Front Control Arm Ball Joint
        • Inspect
      • 3.12 Front Control Arm Inner Bushing
        • Replace
      • 3.13 Front Control Arm Rod Bushing
        • Replace
      • 3.14 Front Control Arm Rod
        • Remove
        • Reinstall
      • 3.15 Front Control Arm Rod Insulating Bushing
        • Replace
      • 3.16 Front Suspension Crossmember
        • Remove
        • Reinstall
      • 3.17 Stabiliser Bar Link
        • Replace
      • 3.18 Stabiliser Bar
        • Remove
        • Reinstall
    • 4 Diagnosis
      • General
      • Strut Diagnosis
      • Acceptance Criteria
      • 4.1 Diagnosis Guide
    • 5 Specifications
      • Suspension Travel
      • Front Spring Details
      • Front Stabiliser Bar Details
      • Front Strut Details
      • Front Control Arm Details
      • Front Wheel Bearings
      • Suspension and Trim Height Specifications
      • Front Wheel Alignment Specifications
    • 6 Torque Specifications
    • 7 Special Tools
Made by Mibble ♥