holden.wiki

• MODEL SELECTION INDEX
• VT SERIES I - COMMODORE, CALAIS SERVICE INFORMATION
• VT SERIES II - COMMODORE, CALAIS SERVICE INFORMATION
• SECTION 2 - SERVICE OPERATIONS
  • 2.1 DRAINING THE SERVICE LINES
  • 2.2 LPG CYLINDER UNLOADING PROCEDURE
  • 2.3 LEAK TESTING
    • COMBUSTIBLE GAS DETECTORS
    • FOAM
    • LEAK TEST PROCEDURE
  • 2.4 FILLER VALVE
    • REMOVE
    • REINSTALL
  • 2.5 FILLER LINE
    • REMOVE
    • REINSTALL
  • 2.6 LPG CYLINDER
    • REMOVE
    • REINSTALL
  • 2.7 SOLENOID AND MANUAL SERVICE VALVE ASSEMBLY
    • EXCESS-FLOW VALVE TEST
    • REPLACE
  • 2.8 SMART UNIT AND SOLENOID VALVE
    • REMOVE
    • REINSTALL
  • 2.9 PICK-UP PIPE AND STRAINER
    • REMOVE
    • REINSTALL
  • 2.10 AUTOMATIC FILL LIMITER
    • TEST
    • REPLACE
  • 2.11 PRESSURE RELIEF VALVE
    • REPLACE
  • 2.12 CYLINDER FUEL GAUGE ASSEMBLY
    • REPLACE
    • CONTENTS GAUGE
  • 2.13 SERVICE LINES
    • FRONT SERVICE LINE
    • INTERMEDIATE SERVICE LINE
    • REAR SERVICE LINE
  • 2.14 LPG LOCKOFF
    • REMOVE
    • FILTER ELEMENT REPLACEMENT
    • TEST
    • REINSTALL
  • 2.15 CONVERTER
    • CONVERTER ON VEHICLE TEST PROCEDURE
    • REMOVE
    • OVERHAUL
    • DISASSEMBLE
    • REASSEMBLE
    • CONVERTER OFF VEHICLE TEST
    • REINSTALL
  • 2.16 REGULATOR CHECK VALVE (RCV)
    • TEST
    • REMOVE
    • REINSTALL
  • 2.17 FUEL CONTROL VALVES
    • REMOVE
    • TEST
    • REINSTALL
  • 2.18 MIXER
    • TEST
    • REMOVE
    • OVERHAUL
    • REINSTALL
  • 2.19 PROM
  • 2.20 ADAPTIVE DIGITAL PROCESSOR
    • REMOVE
  • 2.21 LPG RELAY
  • 2.22 FUEL MODE SWITCH
    • REMOVE
    • TEST
    • REINSTALL
  • 2.23 ADAPTIVE DIGITAL PROCESSOR SET-UP PROCEDURE
    • GENERAL INFORMATION
    • CLEARING ADP MEMORY
    • ADAPTIVE LEARN DRIVE CYCLE PROCEDURE
  • 2.24 COOLANT HOSES
  • 2.25 AIR CLEANER ASSEMBLY
    • REMOVE
    • REINSTALL
  • 2.26 AFTER INSTALLATION CHECK
    • GENERAL INFORMATION
    • UNDERBODY
    • REAR COMPARTMENT
    • UNDER BONNET
    • LEAK CHECK