holden.wiki

• MODEL SELECTION INDEX
• VT SERIES I - COMMODORE, CALAIS SERVICE INFORMATION
• SECTION 5A - STANDARD BRAKES
  • 1. GENERAL INFORMATION
    • 1.1 GENERAL DESCRIPTION
    • 1.2 MASTER CYLINDER
      • MASTER CYLINDER CONSTRUCTION
      • MASTER CYLINDER OPERATION
      • PROPORTIONING VALVE OPERATION
    • 1.3 FRONT AND REAR BRAKES
  • 2. MINOR SERVICE OPERATIONS
    • 2.1 SERVICE NOTES
    • 2.2 PARK BRAKE CABLE, ADJUST
    • 2.3 BRAKE SYSTEM BLEED
    • 2.4 BRAKE FLUID, CHANGE
    • 2.5 BRAKE PADS, REPLACE
      • FRONT BRAKE PAD INSTALLATION
      • REAR BRAKE PAD INSTALLATION
      • BRAKE PAD BEDDING-IN PROCEDURE
    • 2.6 BRAKE PEDAL
      • REMOVE
      • REINSTALL
    • 2.7 PARK BRAKE LEVER
      • REMOVE
      • REINSTALL
    • 2.8 FRONT PARK BRAKE CABLE
      • REMOVE
      • REINSTALL
    • 2.9 REAR PARK BRAKE CABLE/S
      • REMOVE
      • REINSTALL
    • 2.10 FRONT BRAKE HOSE
      • REMOVE
      • REINSTALL
    • 2.11 REAR CALIPER BRAKE HOSE
      • REMOVE
      • REINSTALL
    • 2.12 REAR BRAKE HOSE
      • REMOVE
      • REINSTALL
  • 3. MAJOR SERVICE OPERATIONS
    • 3.1 MASTER CYLINDER
      • REMOVE
      • DISASSEMBLE
      • CLEAN AND INSPECT
      • REASSEMBLE
      • REINSTALL
    • 3.2 BRAKE BOOSTER
      • REMOVE
      • REINSTALL
    • 3.3 BRAKE CALIPER (FRONT & REAR)
      • REMOVE
      • DISASSEMBLE
      • CLEAN AND INSPECT
      • REASSEMBLE
      • REINSTALL
    • 3.4 BRAKE DISC (FRONT AND REAR)
      • REMOVE
      • FRONT DISC, INSPECT
      • REAR DISC, INSPECT
      • REINSTALL
    • 3.5 PARK BRAKE SHOE, ADJUST
    • 3.6 PARK BRAKE SHOE
      • REMOVE
      • REINSTALL
    • 3.7 FRONT DISC BRAKE SHIELD
      • REMOVE
      • REINSTALL
    • 3.8 REAR DISC SHIELD
      • REMOVE
      • REINSTALL
  • 4. DIAGNOSIS
  • 5. SPECIFICATIONS
  • 6. TORQUE WRENCH SPECIFICATIONS
  • 7. SPECIAL TOOLS