holden.wiki

• MODEL SELECTION INDEX
• VT SERIES I - COMMODORE, CALAIS SERVICE INFORMATION
• SECTION 6A1-2 - ENGINE MECHANICAL - V6 SUPERCHARGED
  • 1. GENERAL INFORMATION
    • 1.1 GENERAL DESCRIPTION
    • 1.2 SUPERCHARGER ASSEMBLY
    • 1.3 SUPERCHARGER DRIVE BELT TENSIONER
    • 1.4 BALANCE SHAFT
    • 1.5 CAMSHAFT SPROCKET
    • 1.6 CRANKSHAFT BALANCER
    • 1.7 ROCKER COVERS & GASKETS
    • 1.8 CONNECTING RODS
    • 1.9 PISTONS & PINS
    • 1.10 CYLINDER HEADS & GASKETS
    • 1.11 FUEL INJECTORS
    • 1.12 LOWER INLET MANIFOLD AND GASKETS
    • 1.13 THROTTLE BODY ADAPTOR
    • 1.14 FUEL RAIL
    • 1.15 BYPASS VALVE ACTUATOR
    • 1.16 BOOST CONTROL SOLENOID VALVE
    • 1.17 WATER OUTLET HOSE AND RADIATOR INLET PIPE
    • 1.18 SUPERCHARGER DRIVE BELT IDLER PULLEY & BELT TENSIONER
    • 1.19 FLEXPLATE
    • 1.20 PCM CALIBRATION
    • 1.21 HIGH TENSION LEADS
    • 1.22 DIS COILS & SPARK PLUGS
  • 2. SERVICE OPERATIONS
    • 2.1 SUPERCHARGER OIL LEVEL CHECK
      • REMOVE
      • REINSTALL
    • 2.2 SUPERCHARGER AND GASKET
      • REMOVE
      • REINSTALL
    • 2.3 BYPASS SOLENOID HARNESS ASSEMBLY
      • REMOVE
      • REINSTALL
    • 2.4 THROTTLE BODY
      • REMOVE
      • REINSTALL
    • 2.5 THROTTLE BODY ADAPTOR
      • REMOVE
      • REINSTALL
    • 2.6 ENGINE VENTILATION SYSTEM
    • 2.7 FUNCTIONAL CHECK OF CRANKCASE VENTILATION VALVE
    • 2.8 CRANKCASE VENTILATION VALVE
      • REMOVE
      • REINSTALL
    • 2.9 SUPERCHARGER DRIVE BELT
      • TENSION CHECK
      • INSPECT
      • REMOVE
      • REINSTALL
    • 2.10 SUPERCHARGER DRIVE BELT TENSIONER ASSEMBLY
      • REMOVE
      • REINSTALL
  • 3. SPECIFICATIONS
  • 4. TORQUE WRENCH SPECIFICATIONS