holden.wiki

• MODEL SELECTION INDEX
• VT SERIES I - COMMODORE, CALAIS SERVICE INFORMATION
• SECTION 7A - CLUTCH
  • 1. GENERAL INFORMATION
  • 2. GENERAL DESCRIPTION
    • 2.1 DUAL MASS FLYWHEEL
    • 2.2 CLUTCH CONTROL
      • ARRANGEMENT
    • 2.3 CLUTCH MASTER CYLINDER/ ACTUATING CYLINDER OPERATION
      • CLUTCH RELEASED
      • CLUTCH APPLIED
  • 3. SERVICE OPERATIONS
    • 3.1 FLUID LEVEL CHECK
    • 3.2 CLUTCH HYDRAULIC SYSTEM, BLEED
    • 3.3 CLUTCH MASTER CYLINDER
      • REMOVE
      • DISASSEMBLE
      • CLEAN AND INSPECT
      • REASSEMBLE
      • REINSTALL
    • 3.4 CLUTCH ACTUATING CYLINDER
      • REMOVE
      • DISASSEMBLE
      • CLEAN AND INSPECT
      • REASSEMBLE
      • REINSTALL
    • 3.5 CLUTCH PEDAL
      • REMOVE
      • REINSTALL
    • 3.6 CLUTCH DRIVEN PLATE, PRESSURE PLATE AND/OR THROWOUT BEARING
      • REMOVE
      • INSPECT
      • REINSTALL
    • 3.7 DUAL MASS FLYWHEEL (V6 ENGINED APPLICATIONS ONLY)
      • REMOVE
      • INSPECT
      • REINSTALL
    • 3.8 CRANKSHAFT SPIGOT BUSH
      • REPLACE
  • 4. DIAGNOSIS
  • 5. SPECIFICATIONS
  • 6. TORQUE WRENCH SPECIFICATIONS
  • 7. SPECIAL TOOLS