Menu Holden Logo

holden.wiki
Home Main Menu
Home Main Menu
  • MODEL SELECTION INDEX
  • VT SERIES I - COMMODORE, CALAIS SERVICE INFORMATION
  • SECTION 7C4 - HYDRA-MATIC 4L60-E AUTOMATIC TRANSMISSION: ON-VEHICLE SERVICING
    • 1. GENERAL INFORMATION
      • 1.1 GENERAL SERVICE PRECAUTIONS
        • RECOMMENDATIONS
    • 2. MAINTENANCE AND GENERAL INFORMATION
      • 2.1 FLUID LEVEL CHECK
        • GENERAL INFORMATION
        • TRANSMISSION FLUID COLOUR
        • TRANSMISSION FLUID CHECKING PROCEDURE
        • 4L60-E TRANSMISSION FLUID CHECKING PROCEDURE
      • 2.2 FLUID LEAK DIAGNOSIS AND REPAIR
        • METHODS FOR LOCATING LEAKS
        • REPAIRING THE LEAK
        • POSSIBLE POINTS OF FLUID LEAKS
        • CASE POROSITY REPAIR
      • 2.3 FLEXPLATE AND/OR TORQUE CONVERTER VIBRATION TEST
        • EVALUATION
        • RECTIFICATION
      • 2.4 TRANSMISSION COOLER REVERSE FLUSH AND FLOW RATE CHECK
        • REVERSE FLUSH
        • FLOW RATE CHECK
    • 3. ON-VEHICLE SERVICE OPERATIONS
      • 3.1 FLUID CHANGE AND FILTER REPLACEMENT
      • 3.2 SELECTOR LINKAGE
        • REMOVE
        • INSPECT
        • REINSTALL
        • ADJUST
      • 3.3 SELECTOR CONTROL LEVER ASSEMBLY
        • REMOVE
        • DISASSEMBLE
        • REASSEMBLE
        • REINSTALL
      • 3.4 NEUTRAL START AND BACK-UP LAMP SWITCH
        • REMOVE
        • REINSTALL
        • ADJUST
      • 3.5 VEHICLE SPEED SENSOR
        • REMOVE
        • REINSTALL
      • 3.6 CASE EXTENSION OIL SEAL
        • REPLACE
      • 3.7 EXTENSION HOUSING AND/OR BUSH
        • REPLACE
      • 3.8 1-2 ACCUMULATOR ASSEMBLY
        • REMOVE
        • CLEAN AND INSPECT
        • REINSTALL
      • 3.9 CONTROL VALVE BODY AND WIRING HARNESS
        • REMOVE
        • DISASSEMBLE, CLEAN, INSPECT AND REASSEMBLE
        • REINSTALL
      • 3.10 SPACER PLATE, CHECK BALLS, FILTER SCREENS AND 3-4 ACCUMULATOR
        • REMOVE
        • CLEAN AND INSPECT
        • REINSTALL
      • 3.11 MANUAL SHAFT SEAL
        • REPLACE
      • 3.12 FILLER TUBE
        • REPLACE
      • 3.13 TRANSMISSION ASSEMBLY
        • REMOVE
        • REINSTALL
      • 3.14 TRANSMISSION COOLER PIPES
        • REMOVE
        • REINSTALL
      • 3.15 AUXILIARY OIL COOLER
        • REMOVE
        • REINSTALL
    • 4. SPECIFICATIONS
    • 5. TORQUE WRENCH SPECIFICATIONS
    • 6. SPECIAL TOOLS
Made by Mibble ♥