holden.wiki

• MODEL SELECTION INDEX
• VT SERIES II - COMMODORE, CALAIS SERVICE INFORMATION
• SECTION 7A1 - CLUTCH - GEN III V8 ENGINE
  • 1. GENERAL INFORMATION
  • 2. GENERAL DESCRIPTION
    • 2.1 SELF-ADJUSTING CLUTCH PRESSURE PLATE
      • GEN III V8 ENGINE
    • 2.2 CLUTCH CONTROL
      • ARRANGEMENT
      • OPERATION
  • 3. SERVICE OPERATIONS
    • 3.1 FLUID LEVEL CHECK
    • 3.2 CLUTCH HYDRAULIC SYSTEM, BLEED
    • 3.3 CLUTCH MASTER CYLINDER
    • 3.4 CLUTCH SLAVE CYLINDER
      • REMOVE
      • DISASSEMBLE
      • CLEAN AND INSPECT
      • REINSTALL
    • 3.5 CLUTCH THROWOUT BEARING
      • REPLACE
    • 3.6 CLUTCH PEDAL
    • 3.7 CLUTCH PEDAL SWITCH
      • REMOVE
      • REINSTALL
    • 3.8 CLUTCH AND PRESSURE PLATES
      • REMOVE
      • INSPECT
      • PRESSURE PLATE ADJUSTMENT
      • REINSTALL
    • 3.9 ENGINE FLYWHEEL
      • REMOVE
      • CLEAN AND INSPECT
      • REINSTALL
    • 3.10 RING GEAR
      • REPLACE
    • 3.11 CRANKSHAFT SPIGOT BUSH
      • REPLACE
  • 4. DIAGNOSIS
  • 5. SPECIFICATIONS
  • 6. TORQUE WRENCH SPECIFICATIONS
  • 7. SPECIAL TOOLS