Menu Holden Logo

holden.wiki
Home Main Menu
Home Main Menu
  • MODEL SELECTION INDEX
  • VT SERIES II - COMMODORE, CALAIS SERVICE INFORMATION
  • SECTION 12C - INSTRUMENTS, WIPERS/WASHERS & HORN
    • 1. GENERAL DESCRIPTION
      • 1.1 INSTRUMENT FACIA SWITCHES
      • 1.2 WIPERS AND WASHERS
      • 1.3 HORN
      • 1.4 TRIP COMPUTER — SINGLE WINDOW TYPE
        • OPERATION
        • BASIC FUNCTIONS
        • ADDITIONAL FUNCTIONS
      • 1.5 TRIP COMPUTER — TRIPLE WINDOW TYPE
        • OPERATION
        • BASIC FUNCTIONS
        • ADDITIONAL FUNCTIONS
    • 2. INSTRUMENT SERVICE OPERATIONS
      • 2.1 INSTRUMENT CLUSTER
      • 2.2 INSTRUMENT CLUSTER INPUTS
        • CHECK
      • 2.3 SENDER UNITS
        • VEHICLE SPEED SENDER
        • FUEL GAUGE SENDER UNIT
        • LOW COOLANT SENDER UNIT
      • 2.4 TRIP COMPUTER SWITCH ASSEMBLY
      • 2.5 INSTRUMENT PANEL AUXILIARY POWER CONNECTOR
    • 3. WIPERS AND WASHERS SERVICE OPERATIONS
    • 4. HORN SERVICE OPERATIONS
    • 5. INSTRUMENT DIAGNOSTICS
      • 5.1 BASIC KNOWLEDGE REQUIRED
      • 5.2 PRELIMINARY SYSTEM DIAGNOSIS
      • 5.3 INSTRUMENT CLUSTER DIAGNOSTICS
        • DIAGNOSTIC TROUBLE CODES
        • DIAGNOSTIC MODE OPERATION
        • USE OF TECH 2 DIAGNOSTIC TOOL WITH INTERMITTENT FAULTS
      • 5.4 DIAGNOSING FAULTS NOT COVERED BY TECH 2 DIAGNOSTIC TOOL
      • 5.5 SERIAL DATA COMMUNICATION
        • GENERAL INFORMATION
      • 5.6 CONNECTING TECH 2 FOR SYSTEM DIAGNOSIS
      • 5.7 TECH 2 TEST MODES AND DISPLAYS FOR INSTRUMENT DIAGNOSIS
        • MODEL SELECTION INDEX
        • SYSTEM SELECTION MENU
        • BODY MENU
      • 5.8 INSTRUMENT DIAGNOSTIC PROCEDURES
        • DIAGNOSTIC CIRCUIT CHECK
        • DTC 1 FUEL GAUGE SENDER UNIT — SHORT CIRCUIT
        • DTC 2 FUEL GAUGE SENDER UNIT — INTERMITTENT
        • DTC 3 FUEL GAUGE SENDER UNIT — OPEN CIRCUIT
        • DTC 4 LPG GAUGE SENDER UNIT — OPEN CIRCUIT
        • DTC 5 LPG GAUGE SENDER UNIT — SHORT CIRCUIT
        • DTC 6 LPG GAUGE SENDER UNIT — INTERMITTENT
        • DTC 8 NO SERIAL DATA FROM ABS
        • DTC 9 NO SERIAL DATA FROM BCM
        • DTC 10 NO SERIAL DATA FROM ECC
        • DTC 11 NO SERIAL DATA FROM PCM
        • DTC 12 NO SERIAL DATA FROM SDM
        • DTC 13 NO INSTRUMENT POLL FROM BCM
        • DTC 14 NO SERIAL COMMUNICATION
        • DTC 15 NO SUB-CLOCK
        • DTC 16 ABS OR ABS/ETC FAULT LOGGED
        • DTC 17 BCM FAULT LOGGED
        • DTC 18 ECC FAULT LOGGED
        • DTC 19 PCM FAULT LOGGED
        • DTC 20 SDM FAULT LOGGED
        • DTC 21 TRIP SWITCH SHORT CIRCUIT
        • DTC 22 TRIP SWITCH BUTTON STUCK
        • DTC 24 EE CHECKSUM = FAILURE
        • DTC 25 ROM CHECKSUM = FAILURE
        • DTC 26 INTERNAL FAULT
        • TRIP COMPUTER DIAGNOSTIC FUNCTIONS — SINGLE WINDOW DISPLAY
        • TRIP COMPUTER DIAGNOSTIC FUNCTIONS — TRIPLE WINDOW DISPLAY
      • 5.9 USING TECH 2 TO DIAGNOSE THE INSTRUMENT CLUSTER
      • 5.10 F0: NORMAL MODE
      • 5.11 F1: DIAGNOSTIC TROUBLE CODES
      • 5.12 F2: DATA DISPLAY
      • 5.13 F3: SNAPSHOT
      • 5.14 F4: MISCELLANEOUS TESTS
      • 5.15 F5: PROGRAM
    • 6. TORQUE WRENCH SPECIFICATIONS
    • 7. SPECIAL TOOLS
Made by Mibble ♥