holden.wiki

• MODEL SELECTION INDEX
• VT SERIES II - COMMODORE, CALAIS SERVICE INFORMATION
• SECTION 6B3 - ENGINE COOLING - GEN III V8 ENGINE
  • 1. GENERAL INFORMATION
    • 1.1 GENERAL DESCRIPTION
  • 2. SERVICE OPERATIONS
    • 2.1 SERVICE NOTES
    • 2.2 COOLANT MAINTENANCE
      • TOPPING UP THE COOLING SYSTEM
      • TESTING COOLANT CONCENTRATION
    • 2.3 DRAINING AND FILLING COOLING SYSTEM
      • DRAINING
      • FILLING
    • 2.4 COOLANT HOSES
    • 2.5 CLEANING COOLING SYSTEM
      • COOLING SYSTEM REVERSE FLUSH
    • 2.6 ENGINE ACCESSORY DRIVE BELT TENSION
    • 2.7 ENGINE ACCESSORY DRIVE BELT
      • REMOVE
      • INSPECT
      • REINSTALL
    • 2.8 PRESSURE TESTING
      • SCREW-ON PRESSURE CAP TESTING
      • COOLING SYSTEM PRESSURE TESTING
    • 2.9 THERMOSTAT
      • REMOVE
      • TEST
      • DISMANTLE
      • REASSEMBLE
      • REINSTALL
    • 2.10 COOLANT RECOVERY SURGE TANK
      • REMOVE
      • INSPECT
      • REINSTALL
    • 2.11 ENGINE COOLANT LEVEL SWITCH
      • REMOVE
      • INSPECT
      • REINSTALL
    • 2.12 OIL PAN UNDER-TRAY
      • REMOVE
      • REINSTALL
    • 2.13 AIR BAFFLES
      • REMOVE
      • REINSTALL
    • 2.14 COOLANT PUMP
      • REMOVE
      • DISMANTLE
      • CLEAN AND INSPECT
      • REASSEMBLE
      • REINSTALL
    • 2.15 COOLING FAN AND SHROUD ASSEMBLY
      • REMOVE
      • DISASSEMBLE
      • REASSEMBLE
      • REINSTALL
    • 2.16 RADIATOR
      • REMOVE
      • REINSTALL
      • RADIATOR REPAIR PROCEDURE
  • 3. ENGINE COOLING SYSTEM DIAGNOSIS
    • 3.1 ENGINE OVERHEATING
    • 3.2 LOSS OF COOLANT
    • 3.3 ENGINE FAILS TO REACH NORMAL OPERATING TEMPERATURE
    • 3.4 BLACK LIGHT AND DYE LEAK DIAGNOSIS METHOD
  • 4. SPECIFICATIONS
  • 5. TORQUE WRENCH SPECIFICATIONS
  • 6. SPECIAL TOOLS