SECTION 1A2 - BODY DIMENSIONS

IMPORTANT

Before performing any Service Operation or other procedure described in this Section, refer to

Section 00 CAUTIONS AND NOTES for correct workshop practices with regard to safety and/or

property damage.

1. GENERAL I NFORMATI O N

All inf ormation relating to body dimensions, inc luding the f ront, r ear and tr ans miss ion cr oss members for VX

Series Models is as detailed in Section 1A2 BODY DIMENSIONS of the VT Series I Service Information,

noting the following:

Due to the introduction of side frame member bolts with a tapered boss at the head end of the bolt

(introduced approx im ately January 2000), alignm ent of the f ront sus pension cros sm em ber is not necessary

on VX Series Models. If necessary, refer to Section 3 FRONT SUSPENSION in the VT Series I Service

Information for additional information.

Regardless of the type of transmission fitted to a VX Series Model, operation

2.3 TRANSMISSION CROSSMEMBER ALIGNMENT in Section 1A2 BODY DIMENSIONS in the VT

Series I Service Information remains unchanged. It should be noted though, that the illustration shown for

this operation is a typical view only. For a detailed illustration of the transmission crossmember for a

particular transmission type, refer to the relevant transmission Section in the VT or VX Series Service

Information.