holden.wiki

• MODEL SELECTION INDEX
• MY 2003 VY & V2 II SERIES - SERVICE INFORMATION
• SECTION 10 - WHEELS AND TYRES
  • 1. GENERAL INFORMATION
    • 1.1 WHEEL AND TYRE COMBINATIONS
    • 1.2 TYRE PLACARDS
    • 1.3 TYRE MARKINGS
    • 1.4 SPARE WHEEL STOWAGE
      • SEDAN
      • WAGON
      • COUPE
      • UTILITY
  • 2. SERVICE OPERATIONS
    • 2.1 SPARE WHEEL HOIST – UTILITY
      • REMOVE
      • REINSTALL
    • 2.2 TYRE INFLATION AND INSPECTION
      • PRESSURE ADJUSTMENTS TO SUIT OPERATING CONDITIONS
    • 2.3 WHEEL REMOVAL AND INSTALLATION
    • 2.4 TYRE REMOVAL AND INSTALLATION
      • TYRE REPAIRS
    • 2.5 REPLACEMENT OF WHEELS AND TYRES
    • 2.6 TYRE ROTATION
    • 2.7 CHECKING WHEEL AND TYRE ASSEMBLY RUN-OUT
      • PROCEDURE
      • MATCH MOUNTING
    • 2.8 CHECKING WHEEL RUN-OUT
      • PROCEDURE
    • 2.9 WHEEL AND TYRE BALANCING
      • OFF-VEHICLE BALANCING
      • ON-VEHICLE BALANCING
      • BALANCE LIMITS
    • 2.10 WHEEL ATTACHING NUTS AND STUDS
  • 3. DIAGNOSIS
    • 3.1 WEAR
    • 3.2 ROAD TESTING
      • TYRE AND WHEEL INSPECTION
      • SLOW ACCELERATION TEST
      • NEUTRAL COAST-DOWN TEST
      • DOWNSHIFT TEST
      • STEERING INPUT TEST
      • STANDING START ACCELERATION
    • 3.3 VIBRATION
      • RADIAL FORCE VARIATION
      • LATERAL FORCE VARIATION
    • 3.4 VEHICLE LEAD
  • 4. SPECIFICATIONS
    • STEEL WHEELS
    • ALLOY WHEELS
    • INFLATION PRESSURES
  • 5. TORQUE WRENCH SPECIFICATIONS
  • 6. SPECIAL TOOLS