holden.wiki

• MODEL SELECTION INDEX
• MY 2003 VY & V2 II SERIES - SERVICE INFORMATION
• SECTION 4A - REAR SUSPENSION
  • 1. GENERAL INFORMATION
  • 2. SERVICE OPERATIONS
    • 2.1 SERVICE NOTES AND CAUTIONS
    • 2.2 REAR SUSPENSION CONTROL ARM
      • REMOVE
      • REAR SUSPENSION CONTROL ARM PIVOT BUSHING, REPLACE
      • REINSTALL
    • 2.3 OUTER REAR WHEEL DRIVE SHAFT, FLANGE OR BEARING
      • REPLACE
    • 2.4 REAR SUSPENSION CROSSMEMBER
      • REMOVE
      • REINSTALL
    • 2.5 REAR SUSPENSION CROSSMEMBER FRONT MOUNT BUSHING
      • OFF-CAR REPLACEMENT
      • ON-CAR REPLACEMENT
    • 2.6 REAR SUSPENSION CROSSMEMBER MASS DAMPER
      • REMOVE
      • REINSTALL
    • 2.7 REAR SUSPENSION CROSSMEMBER REAR MOUNT
      • REMOVE
      • REINSTALL
    • 2.8 STABILIZER SHAFT AND/OR MOUNTINGS
      • REMOVE
      • STABILIZER SHAFT LINK INSULATORS, REPLACE
      • REINSTALL
    • 2.9 REAR SPRING AND INSULATORS
      • REMOVE
      • REINSTALL
    • 2.10 REAR SHOCK ABSORBERS AND/OR BUSHING
      • REMOVE
      • LOWER BUSHING, REPLACE
      • REINSTALL
    • 2.11 ADDITIONAL CONTROL ARM
      • INSPECT
      • REMOVE
      • DISASSEMBLE
      • REASSEMBLE
      • REINSTALL
    • 2.12 REAR WHEEL ALIGNMENT CHECKING
      • CAMBER AND TOE CHECK
    • 2.13 REAR WHEEL TOE ADJUSTMENT
  • 3. DIAGNOSIS
    • CHECKING AND TESTING SHOCK ABSORBERS
    • LEAKAGE CRITERIA
  • 4. SPECIFICATIONS
    • REAR SUSPENSION SERVICE ALIGNMENT DATA
    • REAR SPRING DETAILS
    • REAR SHOCK ABSORBER DETAILS
    • REAR STABILIZER SHAFT DETAILS
  • 5.TORQUE WRENCH SPECIFICATIONS
  • 6. SPECIAL TOOLS