holden.wiki

• MODEL SELECTION INDEX
• MY 2003 VY & V2 II SERIES - SERVICE INFORMATION
• SECTION 6C1-3 - SERVICE OPERATIONS - V6 ENGINE
  • 1. GENERAL DESCRIPTION
    • 1.1 SERVICE PRECAUTIONS
  • 2. ELECTRONIC CONTROL
    • 2.1 POWERTRAIN CONTROL MODULE
      • PCM REPLACEMENT/ PROGRAMMING
      • REMOVE
      • REINSTALL
      • SERVICE PROGRAMMING
      • PCM SECURITY LINK
      • FUNCTIONAL CHECK
    • 2.2 CAMSHAFT POSITION SENSOR
      • REMOVE
      • REINSTALL
    • 2.3 ENGINE COOLANT TEMPERATURE (ECT) SENSOR
      • REMOVE
      • REINSTALL
    • 2.4 INTAKE AIR TEMPERATURE (IAT) SENSOR
      • REMOVE
      • REINSTALL
    • 2.5 MASS AIR FLOW (MAF) SENSOR
      • REMOVE
      • REINSTALL
    • 2.6 OXYGEN SENSOR
      • REMOVE
      • REINSTALL
    • 2.7 THROTTLE POSITION (TP) SENSOR
      • REMOVE
      • REINSTALL
    • 2.8 VEHICLE SPEED SENSOR
      • REMOVE
      • REINSTALL
  • 3. FUEL CONTROL SYSTEM
    • 3.1 FUEL PUMP RELAY
      • FUEL PRESSURE RELIEF PROCEDURE
    • 3.2 THROTTLE STOP SCREW – RESET PROCEDURE
      • CHECK OR RESET
    • 3.3 MODULAR FUEL SENDER ASSEMBLY
      • REMOVE
      • REINSTALL
      • FUEL STRAINER AND FUEL LEVEL SENSOR
      • FUEL PUMP ASSEMBLY
    • 3.4 FUEL SYSTEM PRESSURE TEST
      • MEASURE
    • 3.5 FUEL FILTER
      • REMOVE
      • REINSTALL
    • 3.6 LEAK TESTING
    • 3.7 FUEL PRESSURE REGULATOR
      • REMOVE
      • REINSTALL
    • 3.8 FUEL RAIL AND INJECTORS
      • REMOVE
      • DISASSEMBLE
      • REASSEMBLE
      • REINSTALL
    • 3.9 AIR CLEANER ASSEMBLY
      • REMOVE
      • REINSTALL
    • 3.10 THROTTLE CABLE
      • REMOVE
      • REINSTALL
      • ADJUST
    • 3.11 THROTTLE BODY
      • REMOVE
      • CLEAN
      • THROTTLE BODY CLEANING PROCEDURE
      • REINSTALL
      • THROTTLE BODY IAC VALVE COUNT CHECKING PROCEDURE
    • 3.12 FUEL RAIL AND INJECTORS
    • 3.13 IDLE AIR CONTROL VALVE
      • REMOVE
      • CLEAN
      • REINSTALL
    • 3.14. THROTTLE PEDAL ASSEMBLY
      • REMOVE
      • DISASSEMBLE
      • REASSEMBLE
      • REINSTALL
  • 4. DIRECT IGNITION SYSTEM
    • 4.1 GENERAL SERVICE INFORMATION
      • TIMING ADJUSTMENT
      • CHECKING EST SPARK TIMING OPERATION
    • 4.2 IGNITION COIL/S
      • REMOVE
      • RESISTANCE TEST
      • REINSTALL
    • 4.3 DIS MODULE
      • REMOVE
      • REINSTALL
    • 4.4 CRANKSHAFT (CKP) SENSOR
      • REMOVE
      • REINSTALL
    • 4.5 KNOCK SENSORS
      • CHECKING KNOCK SENSOR OPERATION
      • REMOVE
      • REINSTALL
    • 4.6 SPARK PLUG LEADS
      • REMOVE
      • SPARK PLUG LEAD BENCH TESTS
      • REINSTALL
    • 4.7 SPARK PLUGS
      • REMOVE
      • CLEANING AND INSPECTION
      • REINSTALL
      • SPARK PLUG DIAGNOSIS
      • ANALYSIS OF SPARK PLUG CONDITION
  • 5. AUTOMATIC TRANSMISSION
    • SERVICE OPERATIONS AND COMPONENTS
  • 6. MISCELLANEOUS SYSTEMS
    • 6.1 EVAPORATIVE EMISSION CONTROL CANISTER
    • 6.2 CANISTER PURGE SOLENOID
      • REPLACE
    • 6.3 EXHAUST GAS RECIRCULATION (EGR) VALVE
      • REMOVE
      • REINSTALL
    • 6.4 A/C REFRIGERANT PRESSURE SENSOR
      • REPLACE