holden.wiki

• MODEL SELECTION INDEX
• MY 2003 VY & V2 II SERIES - SERVICE INFORMATION
• SECTION 7A1 - CLUTCH – V6 ENGINE
  • 1. GENERAL INFORMATION
  • 2. GENERAL DESCRIPTION
    • 2.1 DUAL MASS FLYWHEEL
      • SERVICE IMPLICATIONS
    • 2.2 CLUTCH CONTROL
      • ARRANGEMENT
    • 2.3 CLUTCH MASTER CYLINDER/ACTUATING CYLINDER OPERATION
      • CLUTCH RELEASED
      • CLUTCH APPLIED
  • 3. SERVICE OPERATIONS
    • 3.1 SERVICE NOTES
    • 3.2 FLUID LEVEL CHECK
    • 3.3 CLUTCH HYDRAULIC SYSTEM, BLEED
    • 3.4 CLUTCH FLUID – CHANGE
    • 3.5 CLUTCH MASTER CYLINDER
      • REMOVE
      • DISASSEMBLE
      • CLEAN AND INSPECT
      • REASSEMBLE
      • REINSTALL
    • 3.6 CLUTCH ACTUATING CYLINDER
      • REMOVE
      • DISASSEMBLE
      • CLEAN AND INSPECT
      • REASSEMBLE
      • REINSTALL
    • 3.7 CLUTCH PEDAL ASSEMBLY
      • REMOVE
      • DISASSEMBLE
      • REASSEMBLE
      • REINSTALL
    • 3.8 CLUTCH PEDAL SWITCH
      • REPLACE
    • 3.9 CLUTCH DRIVEN PLATE, PRESSURE PLATE AND/OR THROWOUT BEARING
      • REMOVE
      • INSPECT
      • REINSTALL
    • 3.10 DUAL MASS FLYWHEEL
      • REPLACE
    • 3.11 CRANKSHAFT SPIGOT BUSH
      • REPLACE
  • 4. DIAGNOSIS
  • 5. SPECIFICATIONS
  • 6. TORQUE WRENCH SPECIFICATIONS
  • 7. SPECIAL TOOLS