holden.wiki

• MODEL SELECTION INDEX
• MY 2003 VY & V2 II SERIES - SERVICE INFORMATION
• SECTION 7A2 - CLUTCH – GEN III V8 ENGINE
  • 1. GENERAL INFORMATION
    • 1.1 SELF-ADJUSTING CLUTCH PRESSURE PLATE
    • 1.2 CLUTCH CONTROL
      • ARRANGEMENT
      • OPERATION
  • 2. SERVICE OPERATIONS
    • 2.1 SERVICE NOTES
    • 2.2 FLUID LEVEL CHECK
    • 2.3 CLUTCH HYDRAULIC SYSTEM, BLEED
    • 2.4 CLUTCH FLUID - CHANGE
    • 2.5 CLUTCH MASTER CYLINDER
    • 2.6 CLUTCH SLAVE CYLINDER
      • REMOVE
      • DISASSEMBLE
      • CLEAN AND INSPECT
      • REINSTALL
    • 2.7 CLUTCH THROWOUT BEARING
      • REMOVE
      • CLEAN AND INSPECT
      • REINSTALL
    • 2.8 CLUTCH PEDAL ASSEBLY
    • 2.9 CLUTCH PEDAL SWITCH
      • REMOVE
      • REINSTALL
    • 2.10 CLUTCH AND PRESSURE PLATES
      • REMOVE
      • INSPECT
      • CLUTCH PRESSURE PLATE ADJUSTMENT
      • REINSTALL
    • 2.11 ENGINE FLYWHEEL
      • REPLACE
    • 2.12 RING GEAR
      • REPLACE
    • 2.13 CRANKSHAFT SPIGOT BEARING
      • REPLACE
  • 3. DIAGNOSIS
  • 4. SPECIFICATIONS
  • 5. TORQUE WRENCH SPECIFICATIONS
  • 6. SPECIAL TOOLS