Menu Holden Logo

holden.wiki
Home Main Menu
Home Main Menu
  • MODEL SELECTION INDEX
  • MY 2003 VY & V2 II SERIES - SERVICE INFORMATION
  • SECTION 7B1 - MANUAL TRANSMISSION – V6 ENGINE
    • 1. GENERAL INFORMATION
      • 1.1 GENERAL DESCRIPTION
        • SYNCHRONISER ASSEMBLIES
        • REVERSE GEAR
        • BEARING SUPPORT
        • LUBRICATION
        • SELECTOR MECHANISM
      • 1.2 POWER FLOWS
      • 1.3 TRANSMISSION SERIAL NUMBER
    • 2. SERVICING INFORMATION
      • 2.1 RECOMMENDED LUBRICANT
      • 2.2 CHECKING TRANSMISSION LUBRICANT LEVEL
      • 2.3 DRAINING AND REFILLING TRANSMISSION
    • 3. MINOR SERVICE OPERATIONS
      • 3.1 BACK-UP LAMP SWITCH
        • REMOVE
        • REINSTALL
      • 3.2 SPEED SENSOR AND/OR BRACKET
        • REPLACE
      • 3.3 GEARSHIFT LEVER KNOB AND BOOT ASSEMBLY
        • REMOVE
        • REINSTALL
      • 3.4 GEARSHIFT LEVER
        • REMOVE
        • DISASSEMBLE
        • REASSEMBLE
        • REINSTALL
        • ADJUST
      • 3.5 SHIFT LINKAGE BRACE RUBBER MOUNTING AND/OR BUSH
        • REPLACE
    • 4. MAJOR SERVICE OPERATIONS
      • 4.1 SPEED SENSOR TOOTHED RING OR TRANSMISSION CASE REAR SEAL
        • REMOVE
        • SPEED SENSOR TOOTHED RING – REPLACE
        • REINSTALL
      • 4.2 TRANSMISSION ASSEMBLY
        • REMOVE
        • REINSTALL
      • 4.3 TRANSMISSION DISASSEMBLE
      • 4.4 TRANSMISSION SUB-ASSEMBLIES
        • DISASSEMBLE
        • INSPECT COMPONENTS
        • SYNCHROMESH ASSEMBLIES
        • REASSEMBLE
        • TRANSMISSION CASE, REAR SECTION
        • TRANSMISSION CASE, FRONT SECTION
        • CLUSTER GEAR END PLAY ADJUSTMENT
        • CLUTCH THROWOUT BEARING GUIDE
      • 4.5 TRANSMISSION REASSEMBLE
    • 5. DIAGNOSIS
    • 6. SPECIFICATIONS
    • 7. TORQUE WRENCH SPECIFICATIONS
    • 8. SPECIAL TOOLS
Made by Mibble ♥