holden.wiki

• MODEL SELECTION INDEX
• WH STATESMAN AND CAPRICE SERVICE SUPPLEMENT
• SECTION 12C - INSTRUMENTS, WIPERS/WASHERS & HORN
  • 1. GENERAL DESCRIPTION
    • 1.1 INSTRUMENT FACIA SWITCHES
    • 1.2 WIPERS AND WASHERS
    • 1.3 HORN
    • 1.4 CLOCK
      • OPERATION
    • 1.5 TRIP COMPUTER — TRIPLE WINDOW TYPE
      • OPERATION
      • BASIC FUNCTIONS
      • ADDITIONAL FUNCTIONS
  • 2. INSTRUMENT SERVICE OPERATIONS
    • 2.1 INSTRUMENT CLUSTER
    • 2.2 INSTRUMENT CLUSTER INPUTS
      • CHECK
    • 2.3 SENDER UNITS
      • VEHICLE SPEED SENDER
      • FUEL GAUGE SENDER UNIT
      • LOW COOLANT SENDER UNIT
    • 2.4 TRIP COMPUTER SWITCH ASSEMBLY
      • REMOVE
      • REINSTALL
    • 2.5 CLOCK
      • REMOVE
      • REINSTALL
    • 2.6 INSTRUMENT PANEL AUXILIARY POWER CONNECTOR
  • 3. WIPERS AND WASHERS SERVICE OPERATIONS
  • 4. HORN SERVICE OPERATIONS
  • 5. INSTRUMENT DIAGNOSTICS
    • 5.1 BASIC KNOWLEDGE REQUIRED
    • 5.2 PRELIMINARY SYSTEM DIAGNOSIS
    • 5.3 INSTRUMENT CLUSTER DIAGNOSTICS
      • DIAGNOSTIC TROUBLE CODES
      • DIAGNOSTIC MODE OPERATION
      • USE OF TECH 2 DIAGNOSTIC TOOL WITH INTERMITTENT FAULTS
    • 5.4 DIAGNOSING FAULTS NOT COVERED BY TECH 2 DIAGNOSTIC TOOL
    • 5.5 SERIAL DATA COMMUNICATION
      • GENERAL INFORMATION
    • 5.6 CONNECTING TECH 2 FOR SYSTEM DIAGNOSIS
    • 5.7 TECH 2 TEST MODES AND DISPLAYS FOR INSTRUMENT DIAGNOSIS
      • MODEL SELECTION INDEX
      • SYSTEM SELECTION MENU
      • BODY MENU
    • 5.8 INSTRUMENT DIAGNOSTIC PROCEDURES
      • DIAGNOSTIC CIRCUIT CHECK
      • DTC 1 - FUEL GAUGE SENER UNIT - SHORT CIRCUIT
      • DTC 2 - FUEL GAUGE SENDER UNIT - INTERMITTENT
      • DTC 3 - FUEL GAUGE SENDER UNIT - OPEN CIRCUIT
      • DTC 8 - NO SERIAL DATA FROM ABS
      • DTC 9 - NO SERIAL DATA FROM BCM
      • DTC 10 - NO SERIAL DATA FROM ECC
      • DTC 11 - NO SERIAL DATA FROM PCM
      • DTC 12 - NO SERIAL DATA FROM SDM
      • DTC 13 - NO INSTRUMENT POLL FROM BCM
      • DTC 14 - NO SERIAL COMMUNICATION
      • DTC 15 - NO SUB-CLOCK
      • DTC 16 - ABS/ETC FAULT LOGGED
      • DTC 17 - BCM FAULT LOGGED
      • DTC 18 - ECC FAULT LOGGED
      • DTC 19 - PCM FAULT LOGGED
      • DTC 20 - SDM FAULT LOGGED
      • DTC 21 - TRIP SWITCH SHORT CIRCUIT
      • DTC 22 - TRIP SWITCH BUTTON STUCK
      • DTC 24 - EE CHECKSUM = FAILURE
      • DTC 25 - ROM CHECKSUM = FAILURE
      • DTC 26 - INTERNAL FAULT
      • TRIP COMPUTER DIAGNOSTIC FUNCTIONS -TRIPLE WINDOW DISPLAY
    • 5.9 USING TECH 2 TO DIAGNOSE THE INSTRUMENT CLUSTER
    • 5.10 F0: NORMAL MODE
    • 5.11 F1: DIAGNOSTIC TROUBLE CODES
    • 5.12 F2: DATA DISPLAY
    • 5.13 F3: SNAPSHOT
    • 5.14 F4: MISCELLANEOUS TESTS
    • 5.15 F5: PROGRAM
  • 6. TORQUE WRENCH SPECIFICATIONS
  • 7. SPECIAL TOOLS