holden.wiki

• MODEL SELECTION INDEX
• WH STATESMAN AND CAPRICE SERVICE SUPPLEMENT
• SECTION 4A - INDEPENDENT REAR SUSPENSION
  • 1. GENERAL INFORMATION
  • 2. GENERAL DESCRIPTION
    • 2.1 SYSTEM OPERATION
      • ACTIVATION
      • LOADED VEHICLE
      • UNLOADED VEHICLE
      • DEACTIVATION
      • RESET PROCEDURE
  • 3. SERVICE MAINTENANCE OPERATIONS
    • 3.1 MAINTENANCE
      • AIR LINES
      • WIRING HARNESS
      • AIR FILTER
  • 4. SERVICE OPERATIONS
    • 4.1 INITIAL AIR CHARGE
    • 4.2 AIR LEAK TEST
    • 4.3 RELIEVING SYSTEM AIR PRESSURE
    • 4.4 COMPRESSOR ASSEMBLY
      • REMOVE
      • DISASSEMBLE
      • REASSEMBLE
      • REINSTALL
    • 4.5 AIR LINES
      • REMOVE
      • REINSTALL
    • 4.6 SHOCK ABSORBER
      • REMOVE
      • REINSTALL
    • 4.7 RIDE HEIGHT SENSOR
      • REMOVE
      • REINSTALL
  • 5. DIAGNOSIS & WIRING
    • EQUIPMENT
    • RIDE HEIGHT SENSOR RESET
    • 5.1 PRELIMINARY DIAGNOSTIC PROCEDURE
    • 5.2 COMPRESSOR ASSEMBLY TEST - MOTOR
    • 5.3 COMPRESSOR ASSEMBLY TEST - SOLENOID
    • 5.4 RIDE HEIGHT SENSOR TEST - COMPRESSOR
    • 5.5 RIDE HEIGHT SENSOR TEST - SOLENOID
    • 5.6 LEVEL RIDE SUSPENSION WIRING DIAGRAM
    • 5.7 LEVEL RIDE SUSPENSION WIRING HARNESS LAYOUT
  • 6. SPECIFICATIONS
  • 7. TORQUE SPECIFICATIONS
  • 8. SPECIAL TOOLS