Menu Holden Logo

holden.wiki
Home Main Menu
Home Main Menu
  • MODEL SELECTION INDEX
  • YG CRUZE
  • SECTION 6B - ENGINE COOLING
    • 1. GENERAL DESCRIPTION
      • 1.1 COOLING SYSTEM CIRCULATION
      • 1.2 COOLANT
        • COOLANT PROPORTIONING TABLE
        • COOLANT CAPACITY
    • 2. DIAGNOSIS
      • 2.1 DIAGNOSIS TABLE
      • 2.2 SYSTEM CIRCUIT
      • 2.3 SYSTEM CIRCUIT INSPECTION
    • 3. MAINTENANCE
      • 3.1 COOLANT LEVEL CHECK
      • 3.2 ENGINE COOLING SYSTEM INSPECTION AND SERVICE
      • 3.3 COOLING SYSTEM FLUSH AND REFILL
      • 3.4 WATER PUMP/GENERATOR DRIVE BELT TENSION INSPECTION AND ADJUSTMENT
    • 4. ON-VEHICLE SERVICE
      • 4.1 SYSTEM COMPONENTS
      • 4.2 COOLING SYSTEM DRAINING
      • 4.3 COOLING SYSTEM REFILL
      • 4.4 COOLING WATER PIPES OR HOSES
        • REMOVAL
        • INSTALLATION
      • 4.5 THERMOSTAT
        • REMOVAL
        • INSPECTION
        • INSTALLATION
      • 4.6 RADIATOR
        • REMOVAL
        • INSPECTION
        • CLEANING
        • INSTALLATION
      • 4.7 RADIATOR COOLING FAN
        • INSPECTION
        • REMOVAL / INSTALLATION
      • 4.8 RADIATOR COOLING FAN RELAY
        • INSPECTION
      • 4.9 WATER PUMP/GENERATOR DRIVE BELT
        • REMOVAL
        • INSTALLATION
        • WATER PUMP BELT TENSION INSPECTION AND ADJUSTMENT
      • 4.10 WATER PUMP
        • REMOVAL
        • INSPECTION
        • INSTALLATION
      • 4.11 ECT SENSOR
    • 5. REQUIRED SERVICE MATERIAL
Made by Mibble ♥