Menu Holden Logo

holden.wiki
Home Main Menu
Home Main Menu
  • MODEL SELECTION INDEX
  • MY 2003 VY & V2 II SERIES - SERVICE INFORMATION
  • SECTION 3 - FRONT SUSPENSION
    • 1. GENERAL DESCRIPTION
    • 2. WHEEL ALIGNMENT
      • 2.1 STEERING GEOMETRY
        • CASTER
        • CAMBER
        • WHEEL TOE
        • STEERING AXIS INCLINATION
        • SCRUB RADIUS
        • INCLUDED ANGLE
        • TOE-OUT ON TURNS
      • 2.2 WHEEL ALIGNMENT CHECKING AND ADJUSTMENT
        • PRELIMINARY INSPECTION
        • CASTER ADJUSTMENT
        • CAMBER ADJUSTMENT
        • TOE ADJUSTMENT
      • 2.3 JACKING PRECAUTIONS
      • 2.4 FRONT WHEEL HUB ASSEMBLY - END FLOAT CHECKING PROCEDURE
    • 3. SERVICE OPERATIONS
      • 3.1 SERVICE NOTES AND CAUTIONS
      • 3.2 SUSPENSION AND TRIM HEIGHT, CHECK
      • 3.3 FRONT WHEEL HUB ASSEMBLY, BRAKE ROTOR AND/OR BRAKE SHIELD
        • REMOVE
        • INSPECT
        • REINSTALL
      • 3.4 FRONT WHEEL HUB STUDS
        • REPLACE
      • 3.5 FRONT STRUT ASSEMBLY
        • REMOVE
        • REINSTALL
      • 3.6 UPPER STRUT SUPPORT BEARING AND MOUNT
        • REMOVE
        • REINSTALL
      • 3.7 FRONT SPRING
        • REMOVE
        • REINSTALL
      • 3.8 FRONT STRUT UNIT
        • REPLACE
      • 3.9 STEERING KNUCKLE
        • REMOVE
        • REINSTALL
      • 3.10 FRONT LOWER CONTROL ARM
        • REMOVE
        • REINSTALL
      • 3.11 FRONT LOWER CONTROL ARM SOCKET ASSEMBLY
        • INSPECT
      • 3.12 FRONT LOWER CONTROL ARM PIVOT BUSHING
        • REPLACE
      • 3.13 FRONT LOWER CONTROL ARM ROD BUSHING
        • REPLACE
      • 3.14 FRONT LOWER CONTROL ARM ROD
        • REMOVE
        • REINSTALL
      • 3.15 FRONT LOWER CONTROL ARM ROD INSULATING BUSHING
        • REPLACE
      • 3.16 FRONT SUSPENSION CROSSMEMBER
        • REMOVE
        • REINSTALL
      • 3.17 STABILIZER SHAFT LINK
        • REPLACE
      • 3.18 STABILIZER SHAFT
        • REMOVE
        • REINSTALL
    • 4. DIAGNOSIS
      • 4.1 DIAGNOSIS GUIDE
    • 5. SPECIFICATIONS
      • SUSPENSION TRAVEL
      • FRONT SPRING DETAILS
      • FRONT STABILIZER SHAFT DETAILS
      • FRONT STRUT DETAILS
      • FRONT LOWER CONTROL ARM DETAILS
      • FRONT WHEEL BEARINGS
      • SUSPENSION AND TRIM HEIGHT SPECIFICATIONS
      • FRONT WHEEL ALIGNMENT SPECIFICATIONS
    • 6. TORQUE SPECIFICATIONS
    • 7. SPECIAL TOOLS
Made by Mibble ♥