Menu Holden Logo

holden.wiki
Home Main Menu
Home Main Menu
  • MODEL SELECTION INDEX
  • MY 2004 WK Series - Service Information
  • Section 2F HVAC Occupant Climate Control (Auto A/C) – Diagnostics
    • 1 General Information
    • 2 Diagnostics
      • 2.1 Diagnostic Trouble Codes
      • 2.2 Data Display
        • F2: Data Display
        • F0: Data List
        • F1: Switch Data
      • 2.3 Miscellaneous Tests
        • LCD Display Test
    • 3 Diagnostic Charts
      • Introduction
      • Chart A – Diagnostic Circuit Check
      • Chart B – OCC System Does Not Power Up
      • DTC 13 – Ambient Temperature Sensor Voltage Too High
      • DTC 14 – Ambient Temperature Sensor Voltage Too Low
      • DTC 15 – In-car Temperature Sensor Voltage Too High
      • DTC 16 – In-car Temperature Sensor Voltage Too Low
      • DTC 17 – Evaporative Temperature Sensor Voltage Too High (LHD)
      • DTC 17 – Evaporative Temperature Sensor Voltage Too High (RHD)
      • DTC 18 – Evaporative Temperature Sensor Voltage Too Low (LHD)
      • DTC 18 – Evaporative Temperature Sensor Voltage Too Low (RHD)
      • DTC 19 – Sun Load Sensor Error
      • DTC 35 – No Serial Data From PCM
      • DTC 36 – No Serial Data From BCM
      • DTC 37 – ROM Checksum Error
      • DTC 38 – EEPROM Checksum Error
      • DTC 39 – RAM Error
      • DTC 40 – Air Mix Door Motor Driver Error
      • DTC 40 – Air Mix Door Motor Driver Error (Driver’s Side Motor – RHD)
      • DTC 40 – Air Mix Door Motor Driver Error (Passenger Side Motor – RHD)
      • DTC 41 – Solenoid Driver Error (LHD)
      • DTC 41 – Solenoid Driver Error (RHD)
      • DTC 43 – Driver’s Air Mix Door Motor Feedback Circuit Voltage Too Low (LHD)
      • DTC 43 – Driver’s Air Mix Door Motor Feedback Circuit Voltage Too Low (RHD)
      • DTC 44 – Driver’s Air Mix Door Motor Feedback Circuit Voltage Too High (LHD)
      • DTC 44 – Driver’s Air Mix Door Motor Feedback Circuit Voltage Too High (RHD)
      • DTC 45 – Passengers Air Mix Door Motor Feedback Circuit Voltage Too Low
      • DTC 46 – Passengers Air Mix Door Motor Feedback Circuit Voltage Too High
      • DTC 47 – Drivers Air Mix Min. Calibration Error (LHD)
      • DTC 47 – Drivers Air Mix Min. Calibration Error (RHD)
      • DTC 48 – Drivers Air Mix Max. Calibration Error (LHD)
      • DTC 48 – Drivers Air Mix Max. Calibration Error (RHD)
      • DTC 49 – Pass Air Mix Min. Calibration Error
      • DTC 50 – Pass Air Mix Max. Calibration Error
    • 4 Wiring Diagrams
      • Connectors: HVAC OCC (Auto A/C) System
      • Connectors: HVAC OCC (Auto A/C) System Continued
      • Connectors: HVAC OCC (Auto A/C) System Continued
      • Wiring Diagram: HVAC OCC (Auto A/C) System – V6 (LHD)
      • Wiring Diagram: HVAC OCC (Auto A/C) System – V6 (RHD)
      • Wiring Diagram: HVAC OCC (Auto A/C) System – GEN III V8 (LHD)
      • Wiring Diagram: HVAC OCC (Auto A/C) System – GEN III V8 (RHD)
      • Wiring Diagram: Rear Remote Control (Level 5 Models only)
Made by Mibble ♥