holden.wiki

• MODEL SELECTION INDEX
• YG CRUZE
• SECTION 1B - AIR CONDITIONING
  • 1. GENERAL DESCRIPTION
    • 1.1 REFRIGERANT CIRCULATION
    • 1.2 REFRIGERANT TYPE
    • 1.3 MAJOR COMPONENTS AND LOCATION
  • 2. DIAGNOSIS
    • 2.1 GENERAL DIAGNOSIS TABLE
    • 2.2 ABNORMAL NOISE DIAGNOSIS
      • ABNORMAL NOISE FROM COMPRESSOR
      • ABNORMAL NOISE FROM MAGNETIC CLUTCH
      • ABNORMAL NOISE FROM TUBING
      • ABNORMAL NOISE FROM CONDENSER assembly
      • ABNORMAL NOISE FROM CRANKSHAFT PULLEY
      • ABNORMAL NOISE FROM TENSION PULLEY
      • ABNORMAL NOISE FROM A/C EVAPORATOR
      • ABNORMAL NOISE FROM BLOWER FAN MOTOR
    • 2.3 QUICK CHECK OF REFRIGERANT CHARGE
      • CHECKING REFRIGERANT CHARGE
    • 2.4 PERFORMANCE DIAGNOSIS
      • PERFORMANCE DIAGNOSIS TABLE
      • HIGH PRESSURE GAUGE
      • LOW PRESSURE GAUGE
      • THERMOMETER AT CENTRE DUCT
      • DETAIL DIAGNOSIS TABLE (AMBIENT TEMPERATURE AT 30°C)
    • 2.5 COMPRESSOR DRIVE BELT
      • INSPECTION
      • ADJUSTMENT
      • REPLACEMENT
  • 3. ELECTRICAL DIAGNOSIS
    • 3.1 WIRING DIAGRAM
    • 3.2 A/C SYSTEM INSPECTION OF ECM AND ITS CIRCUITS
      • VOLTAGE CHECK
      • ECM VOLTAGE VALUES TABLE FOR A/C CONTROL
  • 4. REFRIGERANT RECOVERY, EVACUATING AND CHARGING
    • 4.1 OPERATING PROCEDURE FOR REFRIGERANT CHARGING
    • 4.2 RECOVERY
      • REFRIGERANT RECOVERY
    • 4.3 REPLENISHING COMPRESSOR OIL
      • WHEN CHARGING with REFRIGERANT ONLY
      • WHEN REPLACING COMPRESSOR
      • WHEN REPLACING OTHER PARTs
    • 4.4 EVACUATING
      • EVACUATING PROCEDURE
    • 4.5 CHECKING SYSTEM FOR PRESSURE LEAKS
    • 4.6 CHARGING
      • CHARGING PROCEDURE
    • 4.7 REMOVING MANIFOLD GAUGE SET
    • 4.8 LEAK TEST
      • LIQUID LEAK DETECTORS
  • 5. ON-VEHICLE SERVICE
    • 5.1 SERVICE PRECAUTION
      • REFRIGERANT LINE
      • HANDLING REFRIGERANT HFC-134a (R-134a)
      • REFRIGERANT RECOVERY
      • REFRIGERANT CHARGE
    • 5.2 CONDENSER ASSEMBLY
      • INSPECTION
      • REMOVAL
      • INSTALLATION
    • 5.3 RECEIVER/DRIER
      • REMOVAL
      • INSTALLATION
    • 5.4 CONDENSER COOLING FAN
      • REMOVAL
      • INSTALLATION
      • INSPECTION
    • 5.5 COOLING UNIT (EVAPORATOR)
      • REMOVAL
      • INSPECTION
      • INSTALLATION
    • 5.6 A/C EVAPORATOR TEMPERATURE SENSOR
    • 5.7 EXPANSION VALVE
      • REMOVAL
      • INSTALLATION
      • INSPECTION
    • 5.8 A/C REFRIGERANT PRESSURE SWITCH
      • INSPECTION
    • 5.9 A/C SWITCH
      • REMOVAL AND INSTALLATION
      • INSPECTION
    • 5.10 COMPRESSOR RELAY AND CONDENSER COOLING FAN RELAY
      • INSPECTION
    • 5.11 COMPRESSOR
      • REMOVAL
      • INSTALLATION
    • 5.12 MAGNETIC CLUTCH
      • INSPECTION
      • REMOVAL
      • INSTALLATION
    • 5.13 LIP TYPE SEAL
      • REMOVAL
      • INSTALLATION
  • 6. REQUIRED SERVICE MATERIAL
  • 7. SPECIAL TOOLS